Uniden Cordless Telephone TRU9496 User Manual

 
2
 
3
 
Welcome  
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.  
Note:.Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.from.  
the.actual.unit..  
As.an.Energy.Star®;.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.  
the.Energy.Star®; guidelines for energy efficiency. Energy Star®;.is.a.U.S..registered.mark..  
Uniden;.is.a.registered.trademark.of.Uniden.America.Corporation..AutoStandby,.DirectLink,..  
IntegriSound.and.Random.Code.are.trademarks.of.Uniden.America..  
Accessibility  
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.  
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.dis-  
abilities,.please.call.the.accessibility.voice/TTY.line:.ꢀ-800-874-93ꢀ4..  
A.representative.is.available.to.talk.to.you.M-F,.8:00.am.to.5:00.pm,.CST..After.hours,.you.can.leave.us.a.message,.  
and.we.will.call.you.back..Information.is.also.available.on.our.website,.www.uniden.com,.under.the.“Accessibility”.  
link.  
4
 
 
Terminology.used.in.this.Manual  
The.handset.and.the.base.are.not.in.use..If.the.handset.is.on.the.cradle.or.[ /flash],.[ ],.or.the.  
LINE1.or.LINE2.on.the.cordless.handset.is.not.pressed..No.line.has.been.activated..No.dial.tone.is.  
present..  
Standby  
CID  
Caller.ID.is.available.from.your.Telephone.provider.and.is.offered.to.users.on.a.subscription.basis..  
With.this.service.and.a.display.on.your.cordless.phone,.you.will.be.able.to.see.the.incoming.caller.  
information.such.as.name.and.phone.number..  
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.Telephone.provider..With.this.ser-  
vice,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.party..This.will.  
allow.you.the.ability.to.select.to.talk.to.this.party.and.put.your.existing.party.on.hold.or.make.the.  
decision.to.ring.them.back..  
CID/CW.or.  
CIDCW  
CID.Deluxe.  
or.Call.  
Waiting.  
Deluxe  
Caller.ID.with.Call.Waiting.Deluxe.features.are.offered.by.your.Telephone.provider.with.a.monthly.  
service.subscription..With.this.service.and.while.on.an.existing.phone.call,.you.can.use.additional.  
menu.options.when.a.new.caller.rings.you..By.selecting.Menu.Options,.you.will.be.able.to.see.a.  
complete.list.of.additional.features.that.are.available.to.you..Please.see.page.40.for.details..  
DirectLink  
If.you.have.accessory.handsets.on.your.system,.you.can.use.two.handsets.as.2-way.radios..  
Accessory.  
or.Extra.  
This.phone.system.is.expandable.and.will.support.a.total.of.ten.(ꢀ0).handsets.to.one.base..The.  
accessory,.or.extra.handset,.is.a.handset.that.is.compatible.with.this.model..  
Handsets  
Global.settings.apply.to.registered.handsets.and.the.base..If.you.change.something.under.the.  
global.menu,.you.change.it.for.all.handsets.and.the.base..Only.one.handset.or.the.base.can.  
change.global.settings.at.a.time,.and.you.have.to.make.sure.the.phone.is.not.currently.being.  
used..  
Global.  
settings  
Station  
Talk  
Any.handset.or.the.base.  
A.telephone.line.has.been.activated.on.the.handset.or.base,.enabling.a.dial.tone..  
5
 
 
Product.Overview  
TRU9496.Features:  
• 5.8GHz.DSS.Expandable.System  
• Two.Line.Operation  
DirectLink™  
Room/Baby.Monitoring  
Speakerphones.on.Base.&.Handset  
20.Ringer.Options.on.Handset.(ꢀ0.Tones/ꢀ0.  
Melodies)  
ꢀ0.Speed.Dial.Numbers  
Last.3.Number.Redial  
Trilingual.Menu.Displays.(English,.Spanish.and.  
French)  
Call.Transfer  
Conferencing  
Intercom  
Line.ꢀ.and.Line.2.Displays  
• Expands.up.to.ꢀ0.Handsets  
• Integrated.Digital.Answering.Machine  
• Caller.ID/Call.Waiting.Deluxe  
• Base.Corded.Handset.with.Base.Keypad  
• Cordless.Handset.and.Charger.  
• Advanced.Phonebook.Features:.  
• Store.Up.to.ꢀ00.Names.for.each.station  
• Store.Up.to.2.Numbers.per.Name.(200.#’s.  
Total)  
• Alphabetical.Search  
• Personalized.Ring.by.Party  
• Transfer.Single.Listing.or.Entire.Phonebook.  
Answering.Machine.Features:  
• Digital.Tapeless.Recording  
• Day.and.Time.Announcement  
• Remote.Message.Retrieval  
Toll.Saver  
• Up.to.ꢀ2.Minutes.of.Recording.Time.for.each.line  
• Call.Screening.  
• Personal.or.Pre-recorded.Outgoing.Messages  
• Trilingual.Voice.Prompts.for.Menu.Setup.(Eng-  
lish,.Spanish.and.French)  
• Conversation.Recording  
• Voice.Memo  
• Message.Alert  
• Records.Up.to.59.messages  
6
 
 
TRU9496.-.Parts.of.the.Phone  
The.following.illustrations.show.you.all.of.the.different.parts.of.your.phone..  
Handset  
. Handset.Antenna  
2. Headset.Jack.Cover  
3. Beltclip.Hole  
1
2
6
7
4. Speakerphone.Speaker.and.Ringer  
5. Handset.Battery.Compartment  
6. New.Message.light  
7. Handset.Earpiece  
3
4
8
8. Handset.Display  
9. Soft.keys  
ꢀ0. [ /flash] (talk/flash) key  
ꢀꢀ. [ ].(phonebook).key  
9
10  
11  
14  
15  
16  
tone  
ꢀ2. [ ].key  
def  
1
4
7
abc  
3
6
9
2
5
8
0
ꢀ3. [ ].(speaker).key  
ꢀ4. [ ].(up).key  
ꢀ5. [ ].(end.call).key  
ꢀ6. [ ].(caller.ID).key  
ꢀ7. [ ].(down).key  
17  
ghi  
mno  
jkl  
5
pqrs  
tone  
wxyz  
tuv  
12  
13  
oper  
18  
19  
,
redial  
pause  
int com  
hold  
speaker  
ꢀ8. [#].key  
20  
21  
22  
ꢀ9. [redial/pause].key  
20. [int’com/hold].(intercom/hold).key  
2ꢀ. Handset.Microphone  
22. Handset.Charging.Contacts  
7
 
 
Parts.of.the.Answering.Machine.Base  
41 42 43  
26 27 28 29  
23  
24  
30  
31  
32  
33  
34  
Answering Machine Keys  
35  
repeat skip  
exit/play stop  
answer on/off  
delete  
40 39 38  
37 36  
25  
23. Base.Corded.Handset  
24. Base.Speaker  
25. Curly.Cord.  
33. [LINE.1].key.and.light  
34. [LINE.2].key.and.light  
35. [ ].(speaker).key.and.speaker.light.  
26. Base.Display  
36. Base.Microphone  
27. Soft.Keys  
37. [#].key  
28. [ ].(phonebook).key  
29. [ ].(up).key  
30. [ ].(caller.ID).key  
3ꢀ. [ ].(down).key  
38. [ tone].key  
39. [flash/find handset].key  
40. [int’com/hold].(intercom/hold).key  
4ꢀ. DC.IN.9V.Jack  
42. TEL.LINE.ꢀ/2.Jack  
32. [dnd].(do.not.disturb).key.and.light  
43. TEL.LINE.2.Jack  
8
 
Using.the.Interface  
Reading.the.Handset.Display  
The.handset.display.uses.icons.to.tell.you.the.status.of.your.phone..The.table.below.lists.the.icons.and.what.they.mean..  
Icon  
Status  
Description  
Talk  
The.privacy.icon.appears.when.Privacy.mode.is.turned.on..  
Talk  
Talk  
The.call.record.icon.appears.while.recording.a.conversation.  
The.mute.icon.appears.when.you.mute.the.handset..  
The.speaker.icon.appears.when.the.handset.speakerphone.is.in.  
use..  
Talk  
Talk  
This.icon.appears.when.T-coil.mode.is.turned.on.  
The.battery.icon.indicates.the.handset.battery.status:.empty,.low,.  
medium,.and.full.  
Standby/Talk  
The.ringer.off.icon.indicates.that.the.ringer.is.turned.off..The.  
numbers.beside.the.icon.indicate.the.ringer.status.for.line.ꢀ.and.  
line.2.respectively.  
Standby  
The.Line.icon.indicates.the.line.in.use.or.the.line.received.a.new.  
Caller.ID.message.(Lineꢀ.and/or.Line2).  
Standby/Talk  
9
 
 
Reading.the.Base.Display  
The.base.display.uses.icons.to.tell.you.the.status.of.your.phone..The.table.below.lists.the.icons.and.what.they.mean..  
Icon  
Status  
Description  
Talk  
The.privacy.icon.appears.when.Privacy.mode.is.turned.on..  
Talk  
Talk  
The.call.record.icon.appears.while.recording.a.conversation.  
The.mute.icon.appears.when.you.mute.the.base..  
The.answering.machine.off.icon.appears.when.the.answering.  
machine.is.turned.off.  
Standby/Talk  
The.answering.machine.full.icon.appears.when.the.memory.on.  
the.answering.machine.is.full.  
Standby/Talk  
Standby/Talk  
The.answering.machine.announce.only.icon.appears.when.the.  
answering.machine.is.set.to.announce.only.greeting.  
The.ringer.off.icon.indicates.that.the.ringer.is.turned.off..The.  
numbers.beside.the.icon.indicate.the.ringer.status.for.line.ꢀ.and.  
line.2.respectively.  
Standby  
The.Line.icon.indicates.the.line.in.use.or.the.line.received.a.new.  
Caller.ID.message.(Lineꢀ.and/or.Line2).  
Standby/Talk  
ꢀ0  
 
 
The.Standby.Screen  
When.the.phone.is.in.standby,.the.handset.and.base.display.shows.the.following.items:  
• Handset  
Ringer.off.icon.(when.the.ringer.is.off)/.day.of.the.week.and.time./.battery.icon  
Handset.ID.and.Banner  
Number.of.new.Caller.ID.calls.received.(If.there.are.no.new.Caller.ID.messages,.the.Handset.ID.  
appears.here.)  
SUN 12:00A  
Handset #1  
New CID: 5  
LINE1  
MENU  
LINE2  
• Base  
Status.of.your.  
Day.of.the.week.and.time.  
SUN 12:00A  
01/01/06  
answering.machine  
Number.of.  
message  
Date.and.year  
1 2  
REDIAL  
MENU  
RECORD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using.the.Four-way.Function.Key  
Up  
Your.handset.and.the.base.have.a.four-way.function.key.that.allows.  
you.to.move.the.cursor.(or.highlighted.area).on.the.display.and.ac-  
cess.the.most.commonly.used.features.at.the.touch.of.a.button..By.  
moving.this.key.to.the.left,.you.open.the.Phonebook..Move.the.key.  
to.the.right.to.access.Caller.ID.information..To.use.this.four-way.key,.  
place.your.thumb.over.the.key.on.the.station.and.move.to.the.four.  
positions.to.get.the.feel.of.how.it.moves.and.operates..  
View the  
phonebook  
View the  
Caller ID  
Using.the.Handset.and.Base.Menus  
def  
1
abc  
3
2
To.open.the.menu,.press.the.MENU.soft.key..Highlight.the.option.you.  
want.by.pressing.the.four-way.function.key..This.will.move.the.cursor;.  
the.option.currently.highlighted.appears.in.reversed.out.text..Select.  
the.highlighted.option.by.pressing.the.OK.soft.key..To.exit.the.menu.  
and.return.to.standby,.press.[ ].on.the.handset.and.[ /exit].on.the.  
base..  
Four-way  
Function Key  
Down  
If.you.do.not.press.a.key.within.30.seconds,.the.phone.will.time.out.and.exit.the.menu..When.setting.Date.and.Time,.  
the.time-out.period.is.extended.to.two.minutes..  
Note:.For.GLOBAL.SETUP,.ANSW..SETUP,.DEREGISTRATION.(handset),.and.REGISTER.HANDSET.(base).menu.  
options,.make.sure.the.line.is.not.in.use.and.the.handsets.are.within.range.of.the.base.  
ꢀ2  
 
 
Entering.Text.from.your.Phone  
You.can.use.the.number.keypad.on.your.handset.or.base.to.enter.text.by.referring.to.the.letters.printed.on.each.  
number key. When you press the number key in a text entry field, the phone displays the first letter printed on the  
number.key..Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third..Capital.let-  
ters are displayed first, then lower case letters, then the number on the key.  
If two letters in a row use the same number key, enter the first letter, then use [right].or.[left].on.the.four-way.  
function.key.to.move.the.cursor.to.the.next.position.to.enter.the.second.letter..For.example,.to.enter.Movies:.  
ꢀ) Press.6.once.to.enter.M..  
Number of times key is pressed  
2) Use.[right].on.the.four-way.function.key.to.  
move.the.cursor.to.the.right..  
3) Press.6.six.times.to.enter.o..  
4) Press.8.six.times.to.enter.v..  
5) Press.4.six.times.to.enter.i..  
6) Press 3 five times to enter e.  
7) Press.7.eight.times.to.enter.s..  
8) Press.the.OK.soft.key.to.end.your.text.en-  
try..  
If.you.make.a.mistake.while.entering.a.name,.use.  
[right].or.[left].on.the.four-way.function.key.to.  
move.the.cursor.to.the.incorrect.character..Press.  
the.DELETE.soft.key.to.erase.the.wrong.character,.  
and.then.enter.the.correct.character..To.delete.all.  
characters,.press.and.hold.the.DELETE.soft.key.  
ꢀ3  
 
 
Installing.the.Phone  
Choosing.the.Best.Location  
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:.  
• The.location.should.be.close.to.both.a.phone.jack.and.a.continuous.power.outlet.(one.which.  
is.not.connected.to.a.switch)..  
• The.base.and.handset.should.be.kept.away.from.sources.of.electrical.noise.such.as.motors,.  
microwave ovens, and fluorescent lighting.  
• For.better.reception,.place.the.base.as.high.as.possible..  
Correct  
• The.base.should.be.placed.in.an.open.area.for.optimum.range.and.reception..  
• If.your.home.has.wired.alarm.equipment.connected.to.a.phone.line,.be.sure.that.installing.  
the.system.does.not.disable.your.alarm.equipment..If.you.have.questions.about.what.will.  
disable alarm equipment, contact your telephone company or a qualified installer.  
Note:.For.maximum.range:.  
• Keep.the.antenna.free.of.obstruction.  
Incorrect  
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.  
• Do.not.hold.the.handset.where.you.would.block.the.signal..  
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.  
Installing.the.Rechargeable.Battery  
Use.only.the.Uniden.BT-446.rechargeable.battery.pack.supplied.with.your.cordless.telephone..  
Follow.the.steps.below.to.install.a.battery:  
ꢀ) Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover  
downward.to.remove..  
2) Plug.the.battery.cable.into.the.battery.jack..Be.sure.to.match.the.red.and.black.wires.to.the.label.near.the.  
jack..The.cable.should.snap.into.place..Gently.pull.on.the.battery.cable..If.the.battery.connector.comes.lose,.  
try.connecting.again.until.the.battery.snaps.into.place..  
3) Place.the.battery.case.cover.back.on.the.handset.and.slide.it.upwards.until.it.clicks.into.place..  
ꢀ4  
 
 
Charge.the.Cordless.Handset  
The.cordless.handset.is.powered.by.a.rechargeable.battery.pack..The.battery.recharges.automatically.when.the.  
handset.is.placed.in.the.charger..  
ꢀ) Connect.the.AC.adapter.to.the.DC.IN.9V.jack.and.to.a.standard.  
ꢀ20V.AC.wall.outlet.  
2) Set.the.charger.on.a.desk.or.tabletop,.and.place.the.handset.in.  
the.charger.with.the.keypad.facing.forward.  
3) Make.sure.that.the.charge.light.illuminates..If.the.light.does.not.  
illuminate,.check.to.see.that.the.AC.adapter.is.plugged.in.and.  
the.handset.makes.good.contact.with.the.charging.contacts.  
4) Charge.the.handset.battery.pack.for.at.least.ꢀ5-20.hours.before.  
using your new cordless telephone for the first time.  
ꢀ5  
 
 
Connecting.the.Base  
ꢀ) Connect.the.handset.curly.cord.to.the.left.side.of.the.phone.  
and.the.base.corded.handset.  
Note:.Your.phone.has.a.slot.to.route.the.curly.cord.in.the.bot-  
tom.of.the.base.  
2) Connect.the.AC.adapter.to.the.DC.IN.9V.jack.  
3) Connect.the.AC.adapter.to.a.continuous.power.supply.(i.e.,.  
an.outlet.that.is.not.controlled.by.a.switch)..  
4) Set.the.base.on.a.desk.or.tabletop..Place.the.base.corded.  
handset.on.the.base.  
ꢀ6  
 
 
Installing.the.Belt.Clip  
ꢀ) Line.up.the.holes.on.each.side.of.the.handset..To.attach.the.belt.clip,.insert.into.the.holes.on.  
each.side.of.the.handset..Press.down.until.it.clicks..  
2) To.remove.the.belt.clip,.pull.either.side.of.the.belt.clip.to.release.the.tabs.from.the.holes.  
Connecting.to.the.Phone.Line.  
Once.the.handset.battery.pack.is.fully.charged,.connect.the.  
telephone.line.cord.to.the.TEL.LINE.ꢀ/2.jack.and.to.a.tele-  
phone.outlet..  
For.2.line.subscriptions,  
• If.the.two.phone.lines.are.in.one.modular.jack,.connect.  
using.TEL.LINE.ꢀ/2.jack.  
• If.the.two.phone.lines.are.on.two.separate.modular.  
jacks,.connect.using.both.TEL.LINE.ꢀ/2.and.TEL.LINE.  
2.jacks.  
Testing.the.connection  
To test your connection, try making a call. If your call connects, the settings are fine. If your call does not connect,  
check.the.following:  
ꢀ) Check.the.AC.adapter.cord..Make.sure.it.is.securely.connected.to.the.DC.IN.connector.and.to.a.standard.AC.  
power.outlet.  
2) Check.to.make.sure.the.battery.is.fully.charged..(If.you.don’t.see.the.“battery.full”.icon,.check.to.make.sure.  
the.battery.is.properly.connected.)  
3) Change.dial.mode.(instructions.on.page.ꢀ8).  
ꢀ7  
 
 
Selecting.a.Telephone.Line  
TEL-LINE.allows.you.to.set.default.telephone.line..The.line.you.select.will.be.used.when.you.make.a.call..If.you.se-  
lect.Auto,.the.phone.will.default.to.whichever.line.is.currently.free.  
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.or.BASE.SETUP.menu,.and.then.the.Set.TEL.LINE.  
submenu.  
2) Scroll.[ ].to.select.AUTO,.LINEꢀ,.or.LINE2..  
3) Press.the.OK soft key. You will hear a confirmation tone.  
Changing.the.Dial.Mode  
Dial Mode  
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dial-  
ing.or.pulse.dialing..These.days,.most.phone.networks.use.a.method.called.tone.dialing,.  
Pulse  
so.your.phone.comes.programmed.for.tone.dialing..If.your.phone.company.uses.pulse.di-  
BACK  
DELETE  
OK  
aling,.you.will.need.to.change.your.phone’s.dial.mode..If.you.cannot.connect.to.the.tele-  
phone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:  
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.DIAL.MODE.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key..  
3) Press.[ ].on.the.four-way.function.key.to.select.PULSE..(The.initial.setting.is.Tone).  
4) Press.the.OK soft key. You will hear a confirmation tone.  
If.you.ever.need.to.change.the.dial.mode.back.to.Tone,.follow.the.same.procedure,.but.select.TONE.in.step.2.  
ꢀ8  
 
 
Basic.Setup  
Selecting.a.Language  
Your.phone.supports.three.languages:.English,.French.and.Spanish..Once.you.select.a.  
language,.the.menus.on.the.phone.will.display.in.that.language..The.default.language.is.  
English.  
Handset Language  
Englis
Franユais  
BACK  
OK  
Base Language  
Franユais  
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.or.BASE.SETUP.menu,.  
and.then.the.HANDSET.LANGUAGE.or.BASE.LANGUAGE.submenu.  
BACK  
OK  
2) Move.the.cursor.to.choose.ENGLISH,.FRANÇAIS.(French),.or.ESPAÑOL.(Span-  
ish).  
3) Press.the.OK soft key. You will hear a confirmation tone.  
Setting.the.Date.and.Time  
To.change.the.day.and.time.shown.in.the.display,.follow.the.steps.listed.below..  
Date & Time  
1/01/2006  
12:00AM[*=AM/PM]  
Note:.If.you.don’t.press.any.keys.for.two.minutes.when.setting.the.date.and.time,.the.  
BACK  
SAVE  
phone.will.exit.the.menu..  
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.DATE.&.TIME.submenu.  
2) Use.the.four-way.key.to.move.the.cursor.to.highlight.the.month,.day,.year,.hours,.and.minutes...  
To.change,.press.the.number.keypad..  
tone  
3) To.select.AM.or.PM,.press.[ ].,.then.press.the.SAVE soft key. You will hear a confirmation tone.  
ꢀ9  
 
 
Activating.Caller.ID.on.Call.Waiting.and.Call.Waiting.Deluxe  
Call Waiting  
On  
Off  
Your.phone.supports.Caller.ID.on.Call.Waiting.(CIDCW),.so.you.can.see.the.name.and.  
number.of.someone.who.calls.when.you’re.already.on.the.line..Your.phone.also.supports.  
Call.Waiting.Deluxe.(CWDX),.which.gives.you.a.choice.of.how.you.want.to.handle.a.wait-  
ing.call..You’ll.need.to.subscribe.to.these.features.with.your.phone.company.before.you.  
can.use.them..To.let.your.phone.support.these.features,.follow.the.steps.below:  
BACK  
DELETE  
OK  
See.page.40.for.instructions.on.using.Call.Waiting.Deluxe.  
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.CALL.WAITING.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Move.the.cursor.to.select.ON.or.OFF.  
4) If.you.select.ON,.CALL.WAIT.DELUXE.submenu.appears..Move.the.cursor.to.select.ON.or.OFF.  
5) Press.the.OK soft key. You will hear a confirmation tone.  
Activating.Personal.Ring.(Handset.only)  
You.can.assign.special.ring.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.Caller.  
ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ring.to.that.number,.the.phone.uses.it.so.you.know.  
who.is.calling..To.turn.on.personal.ring,.follow.these.steps:  
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.menu,.and.then.the.PERSONAL.RING.submenu.  
2) Move.the.cursor.to.select.ON.or.OFF.  
3) Press.the.OK soft key. You will hear a confirmation tone.  
20  
 
 
Activating.the.Key.Touch.Tone  
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.  
tone.on.or.off.  
Key Touch Tone  
Off  
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.or.BASE.SETUP.menu,.  
BACK  
DELETE  
OK  
and.then.the.KEY.TOUCH.TONE.submenu.  
2) Move.the.cursor.to.select.ON.or.OFF.  
3) Press.the.OK soft key. You will hear a confirmation tone.  
Adjusting.the.Display.(LCD.Contrast)  
Contrast.adjusts.the.handset.and.base.display.brightness..Choose.from.one.of.the.ꢀ0.  
levels.for.optimum.viewing.  
LCD Contrast  
+
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.or.BASE.SETUP.menu,.  
OK  
and.then.the.LCD.CONTRAST.submenu.  
2) Press.[  
/
].on.the.four-way.function.key.to.adjust.the.contrast.of.the.display.  
3) Press.the.OK soft key. You will hear a confirmation tone.  
2ꢀ  
 
 
Adding.Accessory.Handsets  
Your.phone.supports.up.to.ten.(ꢀ0).handsets,.including.any.handsets.supplied.with.your.phone..Accessory.handsets.  
do.not.need.to.be.connected.to.a.phone.jack..You.can.now.place.a.fully-featured.cordless.handset.anywhere.AC.  
power.is.available.to.connect.the.handset.charger..  
Compatible.Handsets  
Your.phone.is.compatible.with.the.following.Uniden.5.8.GHz.Digital.Accessory.Handsets:.TCX905.and.TWX977..  
Please.visit.our.website.at.www.uniden.com.for.the.most.up-to-date.list.of.compatible.handsets..If.you.purchase.an.  
accessory.or.extra.handset,.you.must.register.the.handset.to.the.original.or.main.base.before.use..Accessory.hand-  
sets.will.not.operate.until.they.are.registered.  
22  
 
 
Registering.TCX905/TWX977.Accessory.Handsets,.or.Other.Compatible.Handsets  
If.you.purchase.an.accessory.handset,.you.need.to.register.the.handset.before.use..Only.one.handset.can.be.reg-  
istered.at.a.time..Handsets.supplied.with.the.phone.are.registered.to.the.base.by.the.factory..When.charged,.pre-  
registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.display.MODELS.VARY!.  
PLACE.HANDSET.ON.THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL..(If.an.accessory.  
handset.has.ever.been.registered.to.a.base,.you.must.reset.the.handset.before.you.can.register.it.to.a.new.base..  
See.Resetting.the.Handsets.on.page.24.)  
When.you.register.an.extra.handset.to.the.base,.the.handset.ID.will.be.assigned.  
Models vary!  
Place Handset  
on the base for  
registration  
or refer to  
Owner's Manual  
.. ..  
ꢀ) Before.registering.the.TCX905.or.TWX977.accessory.handset,.the.battery.pack.MUST.be.charged.for.ꢀ5-20.  
hours.  
2) With.the.base.in.standby,.press.the.MENU.soft.key.  
On handset,  
press & hold "#"  
3) Move.the.cursor.to.select.REGISTER.HANDSET..Press.the.OK.soft.key.  
4) On.the.handset,.press.and.hold.[#].until.you.hear.a.beep.  
key for 2sec  
CANCEL  
5) While.the.handset.is.registering,.HANDSET.REGISTERING.will.appear.in.the.dis-  
play..  
When.REGISTRATION.COMPLETE..is.displayed;.the.handset.has.been.registered.to.the.base...  
If.REGISTRATION.FAILED..appears,.please.try.these.steps.again.  
23  
 
 
Resetting.the.Handsets  
If you want to register a handset to a different base or replace a handset with another one, you must first clear the  
existing.registration.data..To.clear,.please.follow.these.steps:.  
ꢀ) Press.the.MENU.soft.key..Select.the.DEREGISTERATION.menu.  
2) ARE.YOU.SURE?.appears..Move.the.cursor.to.select.YES..Press.the.OK.soft.key.  
To.clear.other.handset.information,.please.follow.these.steps:  
ꢀ) From.the.handset,.press.and.hold.[ ].and.[#].for.more.than.5.seconds..Select.the.DEREGISTER.HS.sub-  
menu.  
Deregister HS  
Yes  
No  
2) Move.the.cursor.to.select.the.handset.ID.to.be.de-registered.from.the.list,.and.  
then.press.the.OK.soft.key.  
BACK  
DELETE  
OK  
3) DEREGISTER.HS.appears..Move.the.cursor.to.select.YES..Press.the.OK.soft.  
key.  
4) ARE.YOU.SURE?.appears..Move.the.cursor.to.select.YES,.and.then.press.the.OK.soft.key..You.will.hear.a.  
confirmation tone.  
Base.Unavailable.(Handset.Only)  
To.clear.the.base.registration.data.in.the.handset,.please.follow.these.steps:  
Base Unavailable  
Yes  
ꢀ) Press.and.hold.[ ].and.[#].for.more.than.5.seconds..Select..  
the.BASE.UNAVAILABLE.submenu.  
BACK  
DELETE  
OK  
2) BASE.UNAVAILABLE.appears..Move.the.cursor.to.select.YES,.and.then.press.the.  
OK.soft.key..  
3) ARE.YOU.SURE?.appears..Move.the.cursor.to.select.YES..Press.the.OK.soft.key.  
24  
 
 
Setting.up.the.Phonebook.  
Your.phone.allows.you.to.store.up.to.2.numbers.per.name.and.up.to.ꢀ00.names.in.your.handset.and.base.phone-  
book..Your.phone.shares.memory.between.your.phonebook.and.CID.with.a.total.of.ꢀ00.entries.which.are.not.used.  
up.by.the.2.phone.numbers.that.can.be.stored.per.ꢀ.name.entry..Once.you.store.ꢀ00.phonebook.entries,.CID.infor-  
mation.will.not.be.stored.and.will.only.display.at.time.of.new.incoming.calls..When.Phonebook.entries.are.full,.you.  
will.hear.a.beep.and.MEMORY.FULL.appears..You.cannot.store.any.additional.names.and.numbers.unless.you.de-  
lete.some.of.the.existing.ones.  
You.can.also.use.the.phonebook.or.speed.dial.locations.to.store.a.group.of.numbers.(up.to.32.digits).that.you.may.  
need.to.enter.once.your.call.connects..This.is.referred.to.as.Chain.Dialing.  
Creating.Phonebook.Entries  
To.store.names.and.numbers.in.your.Phonebook,.please.follow.these.steps:  
<Phonebook>  
Total: 0  
ꢀ) When.the.phone.is.in.standby.mode,.press.[ ].(on.the.left.side.of.the.four-way.key).  
2) To.create.a.new.phonebook.entry,.press.the.NEW.soft.key..Edit.Name.appears.  
Search[A‑Z/ / ]  
BACK  
OPTIONS  
NEW  
3) Enter.the.name.for.this.entry.(Edit.Name)..  
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.ꢀ6.  
characters..(See.page.ꢀ3.for.instructions.on.entering.text.).If.you.do.not.want.to.  
enter.a.name.for.this.entry,.your.phone.will.store.this.entry.as.No.Name..Press.the.  
OK soft key when you are finished.  
Edit Name  
BACK  
OK  
25  
 
 
4) Enter.the.number.for.this.entry.(Edit.Number.1)..  
Edit Number1  
Once.you.have.stored.a.name,.EDIT.NUMBERꢀ.appears.next..Use.the.number.  
keypad,.[right].or.[left].on.the.four-way.function.key,.or.the.DELETE.soft.key.to.  
enter.the.phone.number.ꢀ;.the.phone.number.can.contain.up.to.32.digits..If.you.  
need.the.phone.to.pause.between.digits.when.it’s.dialing.(for.example,.to.enter.an.  
BACK  
OK  
extension.or.an.access.code),.press.[redial/pause].on.the.handset.or.the.PAUSE.soft.key.on.the.base.to.  
insert.a.two-second.pause..You.will.see.a.P.in.the.display..You.can.also.use.more.than.one.pause.together.if.  
two.seconds.is.not.long.enough..Each.pause.counts.as.one.digit..Press.the.OK.soft.key.when.you.are.  
finished.  
EDIT.NUMBER2.appears.next..Use.the.same.procedure.when.entering.the.phone.number.ꢀ.to.enter.the.  
phone.number.2..Press.the.OK soft key when you are finished.  
5) Assign.a.personal.ring.tone.for.this.entry.(Personal.Ring).(Handset.only)..  
Personal Ring  
You.can.attach.a.personalized.ring.tone.to.each.phonebook.entry;.the.phone.will.  
use.this.ring.tone.when.this.person.calls..Move.the.cursor.to.highlight.one.of.the.  
20.different.ring.tone.options..As.you.highlight.each.ring.tone,.you.will.hear.a.  
Flicker  
BACK  
DELETE  
OK  
sample.of.that.tone..When.you.hear.the.ring.tone.you.want.to.use,.press.the.OK.  
soft.key..If.you.do.not.want.to.use.a.personal.ring.tone.for.this.phonebook.entry,.select.the.NO.SELECTION.  
option,.and.the.phone.will.use.your.standard.ring.tone.setting..  
6) Assign.this.entry.to.a.Speed.Dial.number.(Speed.Dial)..  
Speed Dial  
Your.phone.has.ꢀ0.speed.dial.numbers,.0.to.9..Move.the.cursor.to.select.the.  
SPD1:Empty  
BACK  
speed.dial.number.you.want.to.assign.to.this.phonebook.entry,.and.press.the.OK.  
soft.key..Select.NO.SELECTION.if.you.do.not.want.to.assign.this.entry.to.a.speed.  
DELETE  
OK  
dial.number..  
7) You will hear a tone confirming that the new phonebook entry has been stored, and DONE! appears in the  
display..  
Note:.When.the.shared.memory.is.full,.the.oldest.Caller.ID.message.is.overwritten.  
26  
 
Finding.a.Phonebook.Entry  
Phonebook.entries.are.stored.in.alphabetical.order..To.scroll.through.the.phonebook,.press.[ ].and.then.press..  
[
].or.[ ].on.the.four-way.function.key..Press.and.hold.[ ].or.[ ].on.the.four-way.function.key.to.scroll.through.the.  
display.quickly..When.viewing.the.phonebook.entry,.use.the.[→].soft.key.or.[right].on.the.four-way.function.key.to.  
display.the.DIAL.NUMBER.2..To.show.the.personal.ring.and.speed.dial,.press.the.[].soft.key.or.[right].on.the.four-  
way.function.key.  
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..Press.[ ].and.a.num-  
ber.key.(0,.2-9) once for the first letter, twice for the second letter, and so on. The phonebook jumps to the first entry  
that.begins.with.the.letter.you.entered;.you.can.then.use.[ ].or.[ ].on.the.four-way.function.key.to.scroll.to.other.en-  
tries..For.example,.to.search.for.an.entry.beginning.with.the.letter.M,.press.6.once.  
To.close.the.phonebook,.press.[ ].on.the.handset.or.[ /exit].on.the.base..If.you.are.looking.up.a.phonebook.entry.  
during.a.call.and.want.to.close.the.phonebook,.press.the.BACK.soft.key..  
Editing.Phonebook.Entries  
ꢀ) Press.[ ].to.open.  
2) Use.[ ].or.[ ].on.the.four-way.function.key.to.scroll.through.the.phonebook.entries..When.you.come.to.the.  
entry.you.want.to.edit,.press.the.OPTIONS.soft.key.  
3) Move.the.cursor.to.select.EDIT.SELECTION.submenu..Press.the.OK.soft.key.  
4) Follow.the.steps.for.Creating.Phonebook.Entries.on.page.25..If.you.do.not.wish.to.change.the.information.at.  
any.step,.simply.press.the.OK.soft.key.to.go.to.the.next.step.  
Storing.Caller.ID.or.Redial.Numbers.in.the.Phonebook  
You.can.store.Caller.ID.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.redial.  
list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.will.not.  
be.able.to.store.it.)  
ꢀ) When.the.phone.is.in.standby,.press.[ ].(on.the.right.side.of.the.four-way.key).to.open.the.Caller.ID.list,.or.  
the.REDIAL.soft.key.on.the.base.or.[redial/pause].on.the.handset.to.open.the.redial.list.  
27  
 
 
2) Use.[ ].or.[ ].on.the.four-way.function.key.to.scroll.through.the.Caller.ID.records.or.redial.numbers..  
When.you.come.to.the.information.you.want.to.store,.press.the.STORE.soft.key.on.the.base..Or.press.the.  
OPTIONS.soft.key.on.the.handset,.and.select..ADD.TO.PHONEBOOK.submenu..<.ADD.TO.PHONEBK.>.ap-  
pears.  
3) Move.the.cursor.to.select.NEW.ENTRY.or.STORE.&.EDIT.to.add.to.an.existing.phonebook.location..Press.  
the.OK.soft.key..For.the.additional.phone.number,.if.the.phone.location.is.already.full,.THIS.PERSON’S.  
PHONE.NUMBER.MEMORY.IS.FULL..appears.in.the.display..The.number.will.not.be.stored.  
Follow.the.steps.for.Creating.Phonebook.Entries.on.page.25..  
Note:.. If.the.Caller.ID.message.was.received.as.a.private.or.unknown.number,.or.the.message.does.not.have.the.  
number,.you.cannot.store.the.message.in.the.phonebook..If.it.was.received.as.private.or.unknown.name,.the.  
message.will.be.stored.as.<NO.NAME>.  
Erasing.Phonebook.Entries  
You.can.erase.individual.phonebook.entries.or.erase.all.the.phonebook.entries.at.once.  
<Options>  
Edit Selection  
ꢀ) When.the.phone.is.in.standby,.press.[ ]..  
2) Use.[ ].or.[ ].on.the.four-way.function.key.or.the.number.keypad.to.select.the.  
Delete Selection  
OK  
BACK  
DELETE  
desired.phonebook.entry,.then.press.the.OPTIONS.soft.key.  
3) Move.the.cursor.to.select.DELETE.SELECTION..Press.the.OK.soft.key.  
4) ARE.YOU.SURE?.appears.in.the.display..Select.YES,.and.then.press.the.OK.soft.key.  
5) You will hear a confirmation tone, and DELETED! appears in the display.  
Deleting.All.Phonebook.Entries.  
ꢀ) When.the.phone.is.in.standby,.press.[ ]..Press.the.OPTIONS.soft.key.  
2) Move.the.cursor.to.select.DELETE.ALL,.and.press.the.OK.soft.key.  
3) ARE.YOU.SURE?.appears.in.the.display..Select.YES.and.then.press.the.OK soft key. You will hear a confir-  
mation.tone,.and.DELETED!.appears.in.the.display..  
28  
 
 
Copying.Phonebook.Entries.to.another.Station  
You.can.transfer.stored.phonebook.entries.from.one.handset.to.another.or.handset.to.the.base.without.having.to.re-  
enter.names.and.numbers..You.can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.  
ꢀ) When.the.phone.is.in.standby,.press.[ ]..  
<Options>  
Copy Slection  
2) Use.[ ].or.[ ].on.the.four-way.function.key.or.the.number.keypad.to.select.the.  
Edit Selection  
DELETE  
desired.phonebook.entry,.then.press.the.OPTIONS.soft.key.  
BACK  
OK  
3) Move.the.cursor.to.select.COPY.SELECTION..Press.the.OK.soft.key..TO.WHICH.  
UNIT?.will.appear..  
4) Scroll.through.the.list.until.the.station.you.wish.to.copy.listings.to.is.highlighted..Press.the.OK.soft.key..  
The.phonebook.entries.will.be.transferred.to.the.designated.handset.or.the.base..During.the.copy.process,.the.re-  
ceiving.station.shows.RECEIVING.and.the.Banner.name.of.the.sending.station..When.the.transfer.is.completed,.  
DONE!.appears.  
Copying.all.the.phonebook.entries.at.once:  
ꢀ) When.the.phone.is.in.standby,.press.[ ]..Press.the.OPTIONS.soft.key.  
2) Move.the.cursor.to.select.COPY.ALL..Press.the.OK.soft.key..TO.WHICH.UNIT?.will.appear.  
3) Scroll.through.the.list.until.the.station.you.wish.to.copy.listings.to.is.highlighted..Press.the.OK.soft.key..  
4) ARE.YOU.SURE?.appears..Select.YES.or.NO..Press.the.OK.soft.key..  
The.phonebook.entries.will.be.transferred.to.the.designated.handset.or.the.base..During.the.copy.process,.  
the.receiving.station.shows.RECEIVING.and.the.Banner.name.of.the.sending.station..When.the.transfer.is.  
completed,.DONE!.appears.  
Note:.  
• If.your.Phonebook.contains.ꢀ00.entries,.you.cannot.store.any.new.phonebook.entries..You.will.hear.a.  
beep,.and.NOT.ENOUGH.MEMORY.IN.RECEIVING.UNIT.appears.on.the.display.  
• If.the.selected.handset.is.out.of.range.or.data.transfer.is.canceled,.UNAVAILABLE.appears.in.the.display..  
Phonebook.listings.will.not.be.transferred.  
29  
 
 
Customizing.Your.Phone  
Changing.the.Handset.Banner  
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..  
The.default.banner.is.Handset.#ꢀ,.Handset.#2,.etc..You.can.change.the.name.your.  
phone.displays.by.changing.the.banner.display..If.you.have.more.than.one.handset,.you.  
can.use.the.banner.name.to.identify.your.handset.during.handset-to-handset.functions.  
like.intercom.and.DirectLink..The.banner.lets.you.customize.the.name.your.handset.displays..The.name.will.be.dis-  
played.on.the.screen.during.Standby,.Intercom,.Intercom.Hold,.Room/Baby.Monitor,.and.Copy.Phonebook.opera-  
tions..The.banner.name.will.be.displayed.on.the.receiving.handset.as.well.  
ꢀ) Press.the.MENU.soft.key..  
2) Select.the.HANDSET.SETUP.menu,.and.then.the.BANNER.DISPLAY.submenu.  
3) Use.the.keypad.or.the.DELETE.soft.key.to.enter.or.edit.the.banner.name..(See.page.ꢀ3.for.detailed.instruc-  
tions.on.entering.text.)  
4) Press.the.OK soft key. You will hear a confirmation tone.  
30  
 
 
Selecting.a.Ring.Tone.(Handset.only)  
You.may.choose.from.ꢀ0.melodies.or.ꢀ0.tones.for.your.phone’s.primary.ring.tone..Each.station.can.use.a.different.  
ring.tone.or.melody..The.available.ring.tones.are.listed.below:  
Melodies  
Ringers  
Flicker  
Beethoven’s.Symphony.#9.[Beethoven9]  
For.Elise.[Elise]  
Clatter  
We.Wish.You.A.Merry.Christmas.[Merry-.Xmas]  
Home.Sweet.Home.[Hm.Swt.Hm]  
Lorri.Song.#6.[Lorri.Song]  
Soft.Alert  
Wake.Up  
Lighting.Bug  
Bebop.(Beep.Boop)  
Tone.Board  
Chirp  
When.the.Irish.Eyes.Are.Smiling.[Irish.Eyes]  
Aura.Lee  
Let.Me.Call.You.Sweet.Heart.[Sweetheart]  
Star.Spangled.Banner.[Star.Spngl]  
Old.MacDonald.[Old.MacDld]  
Party.Clap  
Reminder  
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.menu,.and.then.the.RINGER.TONES.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
Ringer Tones  
Flicke
Clatter  
3) Move.the.cursor.to.highlight.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.  
hear.a.sample.of.the.ring.tone.  
BACK  
DELETE  
OK  
4) When.you.hear.the.tone.you.want.to.use,.press.the.OK.soft.key..You.will.hear.a.  
confirmation tone.  
3ꢀ  
 
 
Activating.AutoTalk.(Handset.only)  
AutoTalk  
AutoTalk.allows.you.to.answer.the.phone.simply.by.removing.the.handset.from.the.cra-  
On  
Off  
dle..You.do.not.have.to.press.any.keys.to.answer.the.call.  
BACK  
DELETE  
OK  
ꢀ) Press.the.MENU.soft.key.  
2) Select.the.HANDSET.SETUP.menu,.and.then.the.AUTOTALK.submenu.  
3) Select.ON.or.OFF,.and.press.the.OK soft key. You will hear a confirmation tone.  
Activating.Any.Key.Answer.(Handset.only)  
Any Key Answer  
Off  
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.in.the.number.key-  
pad.  
BACK  
DELETE  
OK  
ꢀ) Press.the.MENU.soft.key..  
2) Select.the.HANDSET.SETUP.menu,.and.then.the.ANY.KEY.ANSWER.submenu.  
3) Select.ON.or.OFF,.and.then.press.the.OK soft key. You will hear a confirmation tone.  
32  
 
 
Using.your.Phone  
Power.Failure.Operation..(Line.1.only)  
Because.the.phone.is.a.corded/cordless.combination.phone,.it.can.still.perform.several.of.its.functions.during.a.pow-  
er.failure..The.following.features.will.function.even.during.a.power.failure;  
• Making.and.receiving.calls.with.the.base.corded.handset  
• Adjusting.the.volume.on.the.main.base  
• DirectLink.feature  
All.other.features.are.disabled.during.a.power.failure.  
Note:.If.you.are.on.Line.ꢀ.during.a.power.failure,.you.can.continue.your.call.as.normal..If.you.are.on.Line.2.during.  
a.power.failure,.you.must.return.your.corded.handset.to.the.base.and.hang.up.your.call..Only.Line.ꢀ.is.available.for.  
use.during.a.power.failure.  
Two.Line.Operation  
If.you.subscribe.to.two.phone.lines,.those.lines.will.be.completely.independent.on.your.phone..For.example,.you.can.  
have.one.handset.talking.on.Line.ꢀ.while.another.handset.and.the.base.unit.participates.in.a.3-way.conference.on.  
Line.2..You.must.have.a.2-line.subscription.from.your.phone.company.to.use.the.2-line.features.  
33  
 
 
From.the.base..  
corded.handset  
From.the.base.  
speakerphone.  
From.a.cordless.  
handset  
From.a.handset.  
speakerphone  
ꢀ) Press.[ ]...  
The.phone.will.au-  
tomatically.select.  
a.free.line.  
ꢀ) Pick.up.the.base.  
corded.handset.  
from.the.base..  
ꢀ) Remove.the.  
handset.from.the.  
charging.cradle.  
ꢀ) Remove.the.  
handset.from.the.  
charging.cradle.  
The.phone.will.au-  
tomatically.select.  
a.free.line.  
2) Press.[ /flash].  
2) Press.[ ].  
2) Listen.for.the.dial.  
3) Listen.for.the.dial.  
3) Listen.for.the.dial.  
tone.  
tone.  
tone.  
2) Listen.for.the.dial.  
3) Dial.the.number.  
4) Dial.the.number.  
4) Dial.the.number.  
tone.  
OR  
OR  
OR  
3) Dial.the.number.  
ꢀ) Dial.the.Number..  
The.phone.will.au-  
tomatically.select.  
a.free.line.  
ꢀ) Remove.the.  
handset.from.the.  
charging.cradle.  
ꢀ) Remove.the.  
handset.from.the.  
charging.cradle.  
OR  
Making.a.  
call  
2) Dial.the.number..  
2) Dial.the.number..  
2) Press.[ ].  
ꢀ) Dial.the.number..  
The.phone.will.au-  
tomatically.select.  
a.free.line.  
3) Press.[ /flash].  
3) Press.[ ].  
To.select.a.particular.  
line,.press.the.[LINE.1].  
or.[LINE.2].  
To.select.a.particular.  
line,.press.the.LINE.1.  
or.LINE.2.soft.key.  
To.select.a.particular.  
line,.press.the.LINE.1.  
or.LINE.2.soft.key  
2) Pick.up.the.base.  
corded.handset.  
To.select.a.particular.  
line,.press.the.[LINE.1].  
or.[LINE.2].  
34  
 
 
From.the.base..  
corded.handset  
From.the.base.  
speakerphone.  
From.a.cordless.  
handset  
From.a.handset.  
speakerphone  
Press.[ ].or.the.cor-  
responding.line.key.  
([LINE.1].or.[LINE.2]).  
Pick.up.the.base.cord-  
ed.handset.from.the.  
base.  
ꢀ) Pick.up.the.hand-  
set..(If.AutoTalk.  
is.on,.the.phone.  
will.answer.when.  
you.remove.the.  
handset.from.the.  
charging.cradle.)  
ꢀ) Pick.up.the.hand-  
set...  
(If.AutoTalk.is.on,.  
the.phone.will.an-  
swer.when.you.re-  
move.the.handset.  
from.the.charging.  
cradle.)  
Answering.a.  
call  
2) Press.[ /flash].or.  
the soft key flash-  
ing.(LINE.1.or.  
LINE.2)..  
2) Press.[ ].  
(If.Any.Key.An-  
swer.is.on,.you.  
can.also.press.  
any.key.in.the.  
number.keypad.).  
Press.[ ].  
Return.the.base.cord-  
ed.handset.to.the.base.  
cradle.  
Press.[ ].  
Press.[ ].  
Hanging.up  
Note:  
• If.the.line(s).is.already.in.use,.the.base.and.all.registered.handsets.that.are.not.currently.in.use.will.display.IN.  
USE.with.the.corresponding.line.icon.  
To.have.the.phone.select.Line.ꢀ.or.Line.2.instead.of.a.free.line,.set.the.default.telephone.line.(see.page.ꢀ8).  
During a call, if the other line receives a call, the line icon will flash.  
35  
 
 
Making.a.call.from.the.Phonebook  
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.phonebook.  
2) Scroll.through.the.list.with.the.[ ].or.[ ] on the four-way function keys until you find the phonebook entry you  
want.to.call..(See.Finding.a.Phonebook.Entry.on.page.27.)  
3) Press.[ /flash].or.[ ].on.the.handset.or.pick.up.the.base.corded.handset.or.[ ].on.the.base.to.dial.the.num-  
ber.  
The.phone.will.automatically.select.a.free.line..To.select.a.particular.line,.press.the.line.key.([LINE1].or.  
[LINE2]).on.the.base..Or.from.the.handset,.press.the.OPTIONS.soft.key,.select.LINEꢀ.or.LINE2.and.then.  
press.the.OK.soft.key.  
Or.  
ꢀ) Press.[ /flash].or.[ ].on.the.handset.or.pick.up.the.base.corded.handset.or.[ ].on.the.base..  
The.phone.will.automatically.select.a.free.line..To.select.a.particular.line,.press.the.line.key.([LINE1].or.  
[LINE2]).on.the.base.or.the.LINE1.or.LINE2.soft.key.on.the.handset).  
2) Press.[ ].to.open.the.phonebook.  
3) Scroll.through.the.list.with.the.[ ].or.[ ] on the four-way function keys until you find the phonebook entry you  
want.to.call..(See.Finding.a.Phonebook.Entry.on.page.27.)  
4) Press.the.DIAL.soft.key.to.dial.the.number.  
tone  
To.insert.a.ꢀ.in.front.of.a.phonebook.number.to.enable.long.distance.dialing,.press.[ ]..  
To.remove.area.code,.press.[#].  
36  
 
 
Making.a.Call.with.Speed.Dial  
ꢀ) When.the.phone.is.in.standby,.press.and.hold.the.number.key.[0]-[9].until.the.assigned.phonebook.entry.ap-  
pears.in.the.display.  
2) Press.[ /flash].or.[ ].on.the.handset.or.pick.up.the.base.corded.handset.or.[ ].on.the.base.to.dial.the.num-  
ber.  
The.phone.will.automatically.select.a.free.line..To.select.a.particular.line,..press.the.line.key.([LINE1].or.  
[LINE2]).on.the.base..Or.from.the.handset,.press.the.OPTIONS.soft.key,.select.LINEꢀ.or.LINE2.and.then.  
press.the.OK.soft.key.  
Switching.to.the.Handset.Speakerphone.during.a.Call  
To.switch.a.normal.call.to.the.speakerphone,.press.[ ].on.the.handset..To.switch.from.a.speakerphone.call.to.a.nor-  
mal.call,.press.[ ].  
37  
 
 
Using.Caller.ID,.Call.Waiting.and.Redial.Lists  
If.you.subscribe.to.Caller.ID.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.and.  
name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.both.Call.Waiting.and.Caller.ID,.the.phone.also.  
shows.you.the.name.and.the.number.of.any.call.that.comes.in.while.you.are.on.the.line.  
Note:  
• If.you.answer.a.call.before.the.Caller.ID.message.is.received.(for.example,.before.the.second.ring),.the.Caller.  
ID.message.may.not.appear.  
• When.the.call.is.received.via.a.Telephone.Company.that.does.not.offer.Caller.ID.service,.the.caller’s.phone.  
number.and.name.will.not.appear..(This.includes.some.international.calls.)  
• When.the.Call.is.from.a.PBX.(Private.Branch.Exchange),.the.caller’s.phone.number.and.name.may.not.ap-  
pear,.but.you.may.see.a.main.company.phone.number.for.that.PBX.appear.  
Using.the.Caller.ID.List.  
You.can.store.up.to.ꢀ00.Caller.ID.numbers.in.each.handset.or.the.base..Your.phone.shares.up.to.ꢀ00.memory.en-  
tries.between.your.Phonebook.and.Caller.ID..Once.you.reach.your.maximum.phonebook.entries.of.ꢀ00,.Caller.ID.in-  
formation.will.not.be.stored.(but.it.will.still.display.when.the.call.comes.in)..  
To.open.the.Caller.ID.list,.press.[ ].(on.the.right.side.of.the.four-way.key)..The.phone.will.show.the.total.number.of.  
stored.Caller.ID.records..Use.[ ].or.[ ] to scroll through the list, or enter a letter on the keypad to jump to the first  
caller.ID.name.that.starts.with.that.letter..To.scroll.quickly.through.the.list,.press.and.hold.[ ].or.[ ].on.the.four-way.  
function.key.  
Note:.The.number.of.calls.from.the.same.Caller.ID.appears.next.to.the.received.time..If.you.received.ꢀ0.or.more.  
calls.from.the.same.Caller.ID,.*.appears..Once.you.review.the.new.message,.the.number.or.*.will.disappear.  
38  
 
 
Making.a.call.from.a.Caller.ID.Record  
ꢀ) When.the.phone.is.in.standby,.press.[ ].(on.the.right.side.of.the.four-way.key).to.open.the.Caller.ID.list.  
2) Use.[ ].or.[ ] to find the Caller ID record you want to dial.  
tone  
3) To.add.(or.delete).a.“ꢀ”.at.the.beginning.of.the.displayed.phone.number,.press.[ ]..To.add.(or.remove).the.  
stored.area.code,.press.[#]..  
4) Press.[ /flash].or.[ ].on.the.handset.or.pick.up.the.base.corded.handset.or.[ ].on.the.base.to.dial.the.num-  
ber.  
The.phone.will.automatically.select.a.free.line..To.select.a.particular.line,.press.the.line.key.(the.LINE1.or.  
LINE2.soft.key.on.the.handset,.or.[LINE2].or.[LINE2].on.the.base).  
Or  
ꢀ) Press.[ /flash].on.the.handset.or.pick.up.the.base.corded.handset.or.[ ].on.the.handset.or.[ ].on.the.base..  
The.phone.will.automatically.select.a.free.line..To.select.a.particular.line,.press.the.line.key.(the.LINE1.or.  
LINE2.soft.key.on.the.handset,.or.[LINE2].or.[LINE2].on.the.base).  
2) Press.[ ].to.open.the.Caller.ID.list.  
3) Use.[ ].or.[ ] to find the Caller ID you want to dial.  
tone  
4) To.add.(or.delete).a.“ꢀ”.at.the.beginning.of.the.displayed.phone.number,.press.[ ]..To.add.(or.remove).the.  
stored.area.code,.press.[#].  
5) Press.the.DIAL.soft.key.to.dial.the.number.  
Deleting.Caller.ID.Numbers  
To.delete.only.one.Caller.ID.number,.go.to.the.Caller.ID.list.and.select.the.number.you.want.to.delete..Press.the.  
DELETE.soft.key.on.the.base...  
Or.press.the.OPTIONS.soft.key.on.the.handset,.and.select.DELETE.SELECTION.submenu..When.the.phone.asks.  
you to confirm, select YES.  
To.delete.all.the.Caller.ID.numbers,.go.to.the.Caller.ID.list.and.press.the.DELETE.soft.key..Select.YES.when.asked.  
if.you.want.to.DELETE.ALL.  
Note:.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.  
39  
 
 
Using.Call.Waiting.and.Call.Waiting.Deluxe  
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.phone,.a.call.waiting.tone.will.  
sound..Press.[ /flash].on.the.handset.or.[flash/find handset].on.the.base.to.accept.the.waiting.call..There.is.a.short.  
pause,.and.then.you.will.hear.the.new.caller..To.return.to.the.original.caller,.press.[ /flash].on.the.handset.or.[flash/  
find handset].on.the.base.  
Note:.You.must.subscribe.through.your.telephone.provider.to.receive.Call.Waiting.services.  
Your.phone.gives.you.new.options.for.Call.Waiting.Deluxe..At.the.touch.of.a.button,.you.can.place.the.caller.on.hold,.  
send.them.to.your.voice.mail.service,.or.conference.them.into.your.current.call..You.must.subscribe.to.Call.Waiting.  
and.Call.Waiting.Deluxe.to.use.these.features..Not.all.features.are.available.in.all.areas..Check.with.your.telephone.  
provider.for.details.  
Note:.  
To.activate.features,.select.the.CALL.WAITING.submenu.and.the.CALL.WAIT.DELUXE.submenu.to.ON..See.  
• If.you.don’t.choose.a.CWDX.option.within.30.seconds,.the.phone.returns.to.the.call.  
To.return.to.the.call,.press.the.BACK.soft.key.  
ꢀ) When.you.receive.a.Call.Waiting.call,.press.the.MENU.soft.key.  
2) Move.the.cursor.to.CALLWAITDELUXE,.and.then.press.the.OK.soft.key.  
3) Move.the.cursor.or.use.the.number.keypad.[1-7].to.select.an.option.  
2:Tell Busy  
Ask.to.Hold.—.A.prerecorded.message.states.that.the.user.will.be.available.shortly,.and.  
the.call.is.place.on.hold.  
3:Forward  
BACK  
Tell.Busy.—.A.prerecorded.message.tells.the.caller.you.are.busy,.and.the.waiting.call.is.  
disconnected.  
DELETE  
OK  
Forward.—.The.caller.is.sent.to.your.voice.mail.box,.if.available.  
Answer/Drop.— Disconnects the first call, and connects to the new caller.  
Conference.— Starts a conference call with your first and second callers.  
Drop.First/Drop.Last.— During a conference call, allows you to choose to drop the first or last caller.  
4) Press.the.OK soft key. A confirmation screen will appear, and the phone returns to the call.  
40  
 
 
Redialing.a.Number  
You.can.quickly.redial.the.last.3.numbers.dialed.on.each.handset.and.the.base..  
ꢀ) With.the.phone.in.standby,.press.the.REDIAL.soft.key.on.the.base.or.[redial/pause].on.the.handset.to.open.  
the.redial.list..  
2) Use.[  
/
].to.scroll.through.the.redial.list..  
3) When you find the number you want to dial, press [ /flash].or.[ ].on.the.handset.or.pick.up.the.base.corded.  
handset.or.press.[ ].on.the.base.to.dial.the.number.  
The.phone.will.automatically.select.a.free.line..To.select.a.particular.line,.press.the.line.key.(the.LINE1.or.  
LINE2.soft.key.on.the.handset,.or.[LINE2].or.[LINE2].on.the.base).  
Or  
ꢀ) Press.[ /flash].or.[ ].on.the.handset.or.pick.up.the.base.corded.handset.or.press.[ ].on.the.base.to.dial.  
the.number..The.phone.will.automatically.select.a.free.line..To.select.a.particular.line,.press.the.line.key.(the.  
LINE1.or.LINE2.soft.key.on.the.handset,.or.[LINE2].or.[LINE2].on.the.base).  
2) Press.[redial/pause].on.the.handset.or.REDIAL.soft.key.on.the.base.to.open.the.redial.list..  
3) Use.[  
/
].to.scroll.through.the.redial.list..  
4) Press.the.DIAL.soft.key.to.dial.the.number.  
Note:.  
If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.  
• If.the.redial.memory.is.empty,.you.will.hear.a.beep.  
4ꢀ  
 
 
Deleting.a.Redial.Record  
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:  
ꢀ) With.the.phone.in.standby,.press.the.REDIAL.soft.key.on.the.base.or.[redial/pause].on.the.handset.  
2) Use.[  
/
].to.scroll.through.the.redial.list.  
3) When you find the redial number you want to delete, press the DELETE.soft.key.on.the.base..Or.the.  
OPTIONS.soft.key.on.the.handset,.select.DELETE.SELECTION...Are.you.sure?.appears.  
4) Select.YES,.and.press.the.OK.soft.key..The.redialed.number.is.deleted.  
42  
 
 
Adjusting.the.Ringer,.Earpiece.and.Speaker.Volume  
Adjusting.the.Ringer.Volume.  
You.can.choose.from.three.ringer.volume.settings.on.the.handset.and.base.(off,.low,.  
and.high)..  
ꢀ) With.the.phone.in.standby,.press.[  
2) Move.the.cursor.to.select.LINEꢀ.or.LINE2..Press.the.OK.soft.key..  
3) Press.[ ].on.the.four-way.function.key.to.adjust.the.ringer.volume.  
/
].on.the.four-way.function.key.  
/
4) Press.the.OK soft key. You will hear a confirmation tone.  
def  
1
4
abc  
jkl  
3
6
2
5
Adjusting.the.Speaker.Volume.  
Ear.speaker:.You.can.choose.from.six.volume.levels.for.the.earpiece.speaker..To.ad-  
just.the.earpiece.volume.while.on.a.call,.press.[ ].(to.make.it.louder).or.[ ].(to.make.it.softer)..  
ghi  
mno  
Speaker:.You.can.choose.from.six.volume.levels.for.the.handset.speakerphone.and.ten.volume.levels.for.the.base.  
speakerphone..To.adjust.the.speaker.volume.while.on.a.call,.press.[ ].(to.make.it.louder).or.[ ].(to.make.it.softer)..  
T-coil.(Handset.only)  
The.T-coil.feature,.used.by.hearing.aid.users,.reduces.the.magnetic.noise.interference.generated.by.digital.cordless.  
phones..Individuals.using.hearing.aides.will.turn.off.the.hearing.aid.microphone.to.avoid.interference.issues.and.turn.  
on.T-coil..By.toggling.back.and.forth.between.T-coil.on/off.and.the.hearing.aid.microphone.on/off,.you.avoid.exces-  
sive.interference.and.are.able.to.hear.clearly.with.the.hearing.aid.device.  
ꢀ) Press.the.MENU.soft.key..  
2) Select.the.HANDSET.SETUP.menu,.and.then.the.T-COIL.submenu.  
3) Move.the.cursor.to.select.ON.or.OFF.  
4) Press.the.OK soft key. You will hear a confirmation tone.  
Note:.Using.the.T-coil.feature.may.shorten.your.battery’s.talk.time,.please.set.to.off.when.not.using.this.feature.  
43  
 
 
Finding.a.Lost.Handset  
To.locate.a.misplaced.handset,.press.[flash/find handset] key.on.the.base.when.the.phone.is.in.standby..All.regis-  
tered.handsets.will.beep.for.60.seconds,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.any.  
key.on.the.found.handset.or.press.[flash/find handset] key.on.the.base..  
Note:.If.the.battery.pack.is.completely.drained,.the.handset.will.not.beep.when.paging.  
Using.Hold,.Conference.and.Transfer  
Placing.a.Call.on.Hold  
ꢀ) During.a.call,.press.[int’com/hold].to.place.the.caller.on.hold..The.line.key.(the.LINE1.or.LINE2.soft.key.on.  
the.handset,.or.[LINE2].or.[LINE2] on the base) will flash and the caller will be put on hold.  
Note:.If.you.leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.will.read,.HOLD.  
2) To.return.to.the.party.on.hold,.press.[ /flash].or.[ ].on.a.handset.or.pick.up.the.base.corded.handset.or.  
press.[ ].on.the.base.or.press.the.corresponding.line.key.(the.LINE1.or.LINE2.soft.key.on.the.handset,.or.  
[LINE2].or.[LINE2].on.the.base)..The.phone.will.return.to.the.holding.party..  
Note:  
You.can.only.place.a.caller.on.hold.for.5.minutes..Once.5.minutes.has.passed,.that.party’s.line.will.be.discon-  
nected.and.the.phone.will.return.to.standby.  
• While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.  
Conferencing  
If.you.have.more.than.one.handset,.up.to.seven.people.can.participate.in.a.conference.call..A.seven-way.conference.  
call.consists.of.an.outside.line.ꢀ.+.outside.line.2.+.base.+.four.handsets..Only.four.handsets.can.participate.in.any.  
conference.call..You.can.easily.join.a.call.already.in.progress..  
ꢀ) Press.corresponding.line.key.(the.LINE1.or.LINE2.soft.key.on.the.handset,.or.[LINE2].or.[LINE2].on.the.  
base).to.join.the.conference.call..  
2) To.hang.up,.return.the.handset.to.the.cradle.or.press.[ ].on.the.handset.or,.return.the.base.corded.handset.to.  
the.base.or.press.[ ].on.the.base..The.other.party.will.still.be.connected.to.the.call.  
44  
 
 
Conferencing.with.one.outside.line  
To.hold.a.conference.call.with.one.outside.line,.simply.have.the.handsets.or.base.join.the.call.  
Conferencing.with.2.outside.lines  
Follow.the.steps.below.to.allow.both.outside.lines.to.participate.in.a.conference.call:  
ꢀ) During.a.call,.press.[int’com/hold] on the handset or base to put the first caller on hold.  
2) Press.the.line.key.(the.LINE1.or.LINE2.soft.key.on.the.handset,.or.[LINE2].or.[LINE2].on.the.base).for.a.free.  
line.to.make.or.answer.a.second.call.  
3) When.the.second.call.is.connected,.press.the.MENU.soft.key,.and.then.select.CONFERENCE.to.initiate.a.  
conference.call.  
4) To.disconnect.a.single.caller,.press.the.corresponding.line.key.(the.LINE1.or.LINE2.soft.key.on.the.handset,.  
or.[LINE2].or.[LINE2].on.the.base).to.place.the.caller.you.wish.to.keep.speaking.to.on.hold.and.then.press.  
[ ].on.the.handset.or.[ ].on.the.base.to.hang.up.the.other.caller..For.example,.to.hang.up.Line.2.but.leave.  
Line.ꢀ.connected:  
• Press.the.line.2.key.(LINE2.soft.key.on.the.handset,.or.[LINE2].on.the.base).to.put.Line.ꢀ.on.hold.  
• Press.[ ].on.the.handset.or.[ ].on.the.base.to.hang.up.Line.2.  
• Press.the.line.ꢀ.key.(LINE1.soft.key.on.the.handset,.or.[LINE1].on.the.base).to.take.Line.ꢀ.off.hold.and.con-  
tinue.the.conversation.  
To.hang.up.both.lines,.press.[ ].on.the.handset.or.[ ].  
45  
 
Transferring.a.Call  
Hold/Transfer  
All  
Handset  
You.can.transfer.a.call.from.one.station.to.another.  
ꢀ) During.a.call,.press.[int’com/hold].on.the.handset.or.[int'com/hold].on.the.  
base..The.line.key..The.line.key.(the.LINE1.or.LINE2.soft.key.on.the.handset,.or.  
[LINE2].or.[LINE2] on the base) will flash and the caller will be put on hold.  
#2  
LINE2  
OK  
LINE1  
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.transfer.the.call.to,.then.press.the.OK.soft.key..The.call.will.  
automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.the.transfer,.press.[ /flash].or.[ ].the.  
handset.or.[ ].on.the.base.  
3) When.another.station.accepts.the.transferred.call,.your.call.will.be.disconnected..If.you.want.to.rejoin.the.call,.  
press.the.line.key.again.  
Answering.a.Transferred.Call  
When.a.station.receives.a.call.transfer,.it.sounds.a.paging.tone.and.shows.the.ID.of.the.station.that.is.paging..To.ac-  
cept.the.call.transfer:.  
ꢀ) Press.[ /flash],.[int’com/hold],.or.the.ANSWER.soft.key.from.the.handset.(or.pick.up.the.base.corded.hand-  
set.from.the.base,.or.press.[int'com/hold],.[ ],.or.the.ANSWER.soft.key.on.the.base).  
2) After.answering.the.page,.if.you.want.to.accept.the.call.and.speak.to.the.outside.caller,.press.the.correspond-  
ing.line.key..The.line.key.(the.LINE1.or.LINE2.soft.key.on.the.handset,.or.[LINE2].or.[LINE2].on.the.base).  
If you have multiple handsets, only the first handset to answer the transfer page will be connected to the call. If the  
transfer.page.is.not.picked.up.within.one.minute,.the.operation.will.be.canceled.  
46  
 
 
Using.Special.Features  
Do.Not.Disturb.(All.Calls)  
DND.allows.you.to.mute.the.ringer.of.all.registered.handsets.and.the.base..With.the.phone.in.standby,.press.and.  
hold.[dnd] on the base. You will hear a confirmation tone and the [dnd].light.illuminates..To.cancel,.press.[dnd].  
again..You.can.also.mute.the.ringer.tone.while.the.phone.is.ringing.by.pressing.[dnd].on.the.base.  
Note:.If.the.answering.system.is.off,.it.will.automatically.turn.on.when.you.activate.DND..If.you.turn.the.answering.  
machine.off.while.DND.is.on,.DND.automatically.turns.off.along.with.the.answering.machine.  
Muting.the.Ringer.(One.Call.Only)  
While.a.handset.is.ringing,.press.the.MUTE.soft.key.on.the.handset.or.base,.[ ].on.the.handset,.or.[ /exit].on.the.  
base.to.mute.the.ringer.for.this.call..The.phone.will.ring.again.normally.on.the.next.call..(The.handset.must.be.off.the.  
cradle.to.mute.the.ringer.)  
Muting.the.Microphone  
Mute.turns.off.the.microphone.so.the.caller.cannot.hear.you..The.display.shows.the.MUTE.ON.icon.while.the.micro-  
phone.is.muted..  
ꢀ) While.you.are.on.a.call,.press.the.MUTE.soft.key.  
2) MUTE.ON.will.appear.in.the.display.for.2.seconds,.but.the. .icon.will.appear.and.remain.in.the.display.until.  
the.feature.is.turned.off.  
3) To.cancel.muting,.press.the.MUTE.soft.key..MUTE.OFF.appears.  
Privacy.Mode  
If.you.don’t.want.another.station.to.interrupt.you.while.on.a.call,.you.can.turn.on.privacy.mode..As.long.as.your.sta-  
tion.is.in.privacy.mode,.other.stations.won’t.be.able.to.join.your.call.or.make.any.calls.of.their.own.  
ꢀ) While.on.a.call,.press.the.MENU.soft.key.  
47  
 
 
2) Move.the.cursor.to.CALL.PRIVACY,.and.then.press.the.OK.soft.key..PRIVACY.MODE.ON.will.appear.in.the.  
display.for.2.seconds,.but.the. .icon.will.appear.and.remain.in.the.display.until.the.feature.is.turned.off..Other.  
stations.will.not.be.able.to.make.a.call.and.their.display.will.list.UNAVAILABLE.  
To.turn.Privacy.off,.repeat.the.procedures.listed.above..PRIVACY.MODE.OFF.appears.  
Using.the.DirectLink.Feature  
A.pair.of.handsets.(or.two.pairs.of.handsets.at.one.time).can.function.as.two-way.radios..This.fea-  
ture.is.called.DirectLink.and.will.not.interfere.with.the.base’s.ability.to.make.or.receive.telephone.  
calls.while.in.use..To.activate,.you.must.set.both.handsets.to.the.DirectLink.feature..While.using.  
this.feature,.these.two.handsets.will.not.be.able.to.make.or.receive.normal.phone.calls.until.this.  
operation.is.canceled;.however,.other.handsets.will.function.normally..  
Note:.If.the.party.is.out.of.range,.NO.SIGNAL.appears.in.the.display.and.the.operation.will.be.  
canceled.  
ꢀ) Press.the.MENU.soft.key..Select.DIRECTLINK.MODE.menu.  
2) Press.the.OK.soft.key..The.display.shows.TO.ENTER.DIRECTLINK.MODE.PRESS..  
[ENTER].  
3) Press.the.ENTER soft key. You will hear a confirmation tone, and DIRECTLINK MODE COMPLETE appears  
in.the.display.  
To enter  
DirectLink mode  
press [ENTER]  
BACK  
DELETE  
ENTER  
48  
 
 
Making.a.DirectLink.Call  
ꢀ) To.call.another.handset.with.DirectLink,.press.the.DirectLink.soft.key..  
2) Move.the.pointer.to.select.the.handset.you.want.to.call,.and.press.the.OK.soft.key..If.the.handset.is.out.of.  
range.or.not.in.DirectLink.operation,.the.display.shows.OUT.OF.RANGE.  
3) On.the.receiving.handset,.press.the.ANSWER.soft.key.or.[ /flash].  
Exiting.a.DirectLink.Call.  
To.exit.the.DirectLink.feature.and.return.to.standby,.press.the.CANCEL.soft.key.and.then.press.the.OK.soft.key...  
DIRECTLINK.MODE.CANCEL.appears.in.the.display.  
Intercom  
Making.an.Intercom.Page  
You.can.use.the.intercom.to.talk.to.another.station.without.using.the.phone.line..  
ꢀ) With.the.phone.in.standby,.press.[int’com/hold].  
2) Use.[ ].or.[ ].to.select.the.handset.or.base.you.want.to.talk.with,.and.then.press.the.OK.soft.key..If.you.se-  
lect.ALL,.all.other.registered.handsets.and.base.will.be.paged..An.intercom.tone.sounds..To.cancel.intercom,.  
press.the.CANCEL.soft.key.  
49  
 
 
Answering.an.Intercom.Page  
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.station.that.is.  
paging..  
Intercom  
「「 Handset #1  
ANSWER  
ꢀ) Press.[ /flash],.[int’com/hold],.or.the.ANSWER.soft.key.(or.pick.up.the.base.  
corded.handset..To.answer.with.the.base.speakerphone.press.[int'com/hold],.  
tone  
[
].or.the.ANSWER.soft.key.on.the.base)..Or.press.a.number.key,.[ ],.or.[#].(when.Any.Key.Answer.is.en-  
abled),.or.pick.up.the.handset.from.the.cradle.(when.AutoTalk.is.on).  
2) To.hang.up.an.intercom.page,.press.the.END.soft.key.or.[ ].on.either.handset.(or.return.the.base.corded.  
handset.to.the.base,.or.press.[int'com/hold].on.the.base).  
Note:.  
• If.the.party.is.busy,.the.handset.returns.to.standby..If.the.party.is.out.of.range,.UNAVAILABLE.appears.in.the.  
display.and.the.operation.will.be.canceled.  
• If.you.receive.an.outside.or.intercom.call.or.page.while.selecting.the.other.station,.the.operation.is.canceled.  
• If.you.do.not.select.a.station.within.30.seconds,.the.operation.will.be.canceled..  
• If.the.party.does.not.answer.within.one.minute,.the.operation.is.canceled.  
Room/Baby.Monitor  
This.feature.allows.you.to.monitor.sounds.in.another.room..Place.a.  
handset.(or.the.base).in.the.room.you.wish.to.monitor;.it.will.function.as.  
a.microphone..Another.handset.(or.the.base).can.be.set.to.function.as.a.  
remote.speaker,.allowing.you.to.monitor.sounds.in.the.room..  
ꢀ) Press.the.MENU.soft.key.and.enter.the.Room.Monitor.menu...  
TO.WHICH.UNIT?.appears.  
2) Select.the.handset.or.base.you.want.to.monitor.by.using.[ ].or..  
[
].  
50  
 
 
3) Press.the.OK.soft.key..MONITOR.appears.on.the.handset.or.the.base,.and..  
MONITORING.appears.on.the.base.or.the.handset,.and.you.will.hear.sounds.in.  
the.room.where.the.handset.or.base.is.installed.  
To which unit?  
Handset #3  
BACK  
DELETE  
OK  
4) To.turn.off.the.Room.Monitor,.press.the.END.soft.key.or.[ ].on.either.handset.or.  
return.the.handset.to.the.cradle.  
If.you.want.to.prevent.other.handsets.or.the.base.from.monitoring.the.station,.press.the.  
MENU.soft.key.on.the.handset.or.base..Select.the.HANDSET.SETUP.menu.or.the..  
BASE.SETUP.menu,.and.then.the.ROOM.MONITOR.submenu..Select.OFF.and.press.  
the.OK.soft.key.  
Monitoring  
」」 Handset #2  
LINE1  
END  
LINE2  
Note:.  
• This.feature.only.works.when.the.handset(s).is.within.range.of.the.base.  
• If.the.party.is.out.of.range,.UNAVAILABLE.appears.in.the.display.and.the.operation.will.be.canceled.  
• While.a.pair.of.handsets.is.in.Room/Baby.Monitoring,.they.cannot.be.used.to.make.or.receive.calls;.however,.  
other.handsets.can.still.make.and.receive.calls.normally.  
Tone.Dialing.Switch.Over  
If.your.telephone.company.requires.pulse.dialing,.you.can.switch.to.tone.dialing.after.the.call.connects..This.feature.  
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.  
prescription refills, customer support menus, etc. If your phone is set to pulse dialing, make your call normally. Once  
tone  
your.call.connects,.press.[ ].on.the.handset.or.base..Any.digits.you.enter.from.then.on.will.be.sent.as.tone.dialing..  
When.this.call.ends,.the.phone.automatically.returns.to.pulse.dialing.  
5ꢀ  
 
 
Installing.the.Optional.Headset  
Your.phone.may.be.used.with.an.optional.headset..To.use.this.feature,.insert.the.head-  
set.plug.into.the.headset.jack..Your.phone.is.ready.for.hands-free.conversations...  
Headsets.may.be.purchased.by.calling.the.Uniden.Parts.Department..See.back.cover.  
page.for.contact.information.  
Seven-Digit.Dialing  
If.you.can.make.a.local.call.by.dialing.only.7.digits.(instead.of.ꢀ0),.you.can.program.  
your.local.area.code.into.your.phone..If.you.get.a.call.from.within.your.area.code,.you’ll.  
only.see.the.7-digit.phone.number..If.you.get.a.call.from.outside.your.area.code,.you’ll.  
see.all.ꢀ0.digits..To.enter.an.area.code,.follow.the.steps.below:  
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Use.the.number.keypad.(0-9).to.enter.a.3-digit.area.code..If.an.area.code.has.already.been.stored,.it.will.ap-  
pear.in.the.display..Press.the.DELETE.soft.key.to.delete.the.stored.code,.and.then.enter.a.new.one.  
4) Press.the.OK soft key. You will hear a confirmation tone.  
Inuse.Line.Setup.(Base.only)  
The.Inuse.Line.Setup.feature.is.only.used.in.instances.where.you.have.multiple.phones.where.users.may.pick.up.an.  
extension.while.someone.else.is.on.the.phone..Only.in.very.rare.instances.where.your.phone.system.is.not.detecting.  
that.an.extension.phone.is.picked.up.will.you.ever.need.to.change.this.feature..In.most.all.situations,.this.feature.will.  
never need to be used or modified from the factory default setting of TYPE-A. There are three settings for this fea-  
ture:.TYPE-A,.TYPE-B,.or.OFF.  
52  
 
 
You.should.only.change.this.option.when.instructed.to.by.customer.service.and.when.you.are.experiencing.one.of.  
the.following.issues:  
Issue  
Problem  
Resolution  
When.using.an.extension.phone,.  
“Line.in.Use”.will.not.appear.in.the.  
original.handset.display.  
Your.phone.should.detect.when.an- Set.the.Inuse.Line.Setup.to.“TYPE-  
other.extension.phone.is.used.  
B”.or.contact.Uniden’s.custom-  
er.service.hotline..See.back.cover.  
page.for.contact.information.  
You.place.a.caller.on.hold..You.pick. Your.phone.system.is.not.detecting. Contact.Uniden’s.customer.serv-  
up an extension handset and finish  
that.the.line.was.picked.up.and.re-  
ice.hotline..See.back.cover.page.for.  
contact.information.  
your.conversation..You.hang.up.the. leased.  
call.from.your.extension.handset,.  
but.the.original.station.where.you.  
placed.the.caller.on.hold.does.not.  
release.the.line.and.therefore,.thinks.  
you.still.have.a.party.on.hold.  
Note:.Do.not.set.your.Inuse.Line.Setup.to.OFF.unless.instructed.to.by.a.Uniden.Customer.Service.Representative..If.  
you.set.the.Inuse.Line.Setup.to.OFF,.your.phone.cannot.detect.the.status.of.an.extension.phone.while.in.use.and.will.  
not.operate.correctly.  
To.change.the.settings.do.the.following.steps:  
ꢀ) Press.the.MENU.soft.key.on.the.base..Select.the.GLOBAL.SETUP.menu,.and.then.the.INUSE.LINE.SETUP.  
submenu.  
2) CHANGE.ONLY.IF.INSTRUCTED.BY.CUSTOMER.SERVICE.appears..Press.the.OK.soft.key.  
3) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
4) Move.the.cursor.to.select.TYPE-A,.TYPE-.B,.or.OFF...  
Press.the.OK soft key. You will hear a confirmation tone.  
53  
 
Setting.Up.the.Answering.Machine  
Your.phone.has.a.built-in.answering.machine.that.answers.and.records.incoming.calls..You.can.also.use.your  
answering.machine.to.record.a.conversation.or.leave.a.voice.memo.  
Features  
• Digital.Tapeless.Recording  
• Up.to.ꢀ2.Minutes.of.Recording.Time.for.  
Each.Line  
• Remote.Message.Retrieval  
Toll.Saver  
• Conversation.Recording  
• Voice.Memo  
• Call.Screening  
• Personal.or.Pre-recorded.Outgoing.  
Messages  
• Voice.Prompts.for.Menu.Setup.(English,.  
Spanish,.or.French)  
• Message.Alert  
• Hands.Free.Speakerphone.at.Base  
• Records.Up.to.59.messages  
• Day.and.Time.Announcement  
Digital.Tapeless.Recording.allows.you.to.quickly.review,.save,.or.delete.the.messages.you.choose..You.will.  
never.have.to.worry.about.a.tape.wearing.out,.jamming,.or.resetting.improperly.  
54  
 
 
Using.the.Answering.Machine.Interface  
Using.Handset.and.Base.Menus  
You.can.set.up.your.answering.machine's.primary.features.from.the.base.or.handset..The.menu.options.of.the.base.  
have.voice.prompts..  
When.the.phone.is.in.standby,.press.the.MENU.soft.key.and.then.scroll.down.and.select.ANSW..SETUP..Press.  
the.OK.soft.key..Use.[ ].or.[ ].to.scroll.through.the.answering.machine.setup.menu.options..Select.the.option.by.  
pressing.the.OK.soft.key.  
To.exit.the.menu.and.return.to.standby,.press.[ ].on.the.handset.and.[ /exit].on.the.base.  
Handset.operation.  
You.can.use.your.handset.to.operate.your.answering.machine.from.anywhere.in.your.home..When.the.phone.is.in.  
standby,.press.the.MENU.soft.key.on.the.handset.and.select.RETRIEVE.MSG.to.access.the.answering.system..  
Press.the.LINE1.or.LINE2.soft.key..REMOTE.ANSWERING.MACHINE.OPERATION.appears.on.the.handset.dis-  
play,.and.the.answering.machine.announces.the.day.and.time,.and.the.number.of.new.and.old.messages..Keep.the.  
following.things.in.mind.when.you.use.your.handset.to.access.your.answering.machine:.  
You.can.enter.a.command.at.any.time.during.the.announcements..  
After the first announcement, you have 30 seconds to enter your first command before the answering ma-  
chine.returns.to.standby..  
• If.you.receive.a.call,.the.remote.operation.is.cancelled..  
• During.the.remote.operation.HANDSET.REMOTE.MODE.appears.on.the.base..  
55  
 
 
Selecting.the.Language  
You.can.select.the.language.(English,.French,.and.Spanish).of.your.answering.machine.announcements..The.de-  
fault.answering.machine.language.is.English..  
From.the.base.or.handset:  
ꢀ) Press.the.MENU.soft.key..Select.the.ANSW..SETUP.menu.option,.then.the.ANSW.LANGUAGE..  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Move.the.cursor.to.choose.ENGLISH,.FRANÇAIS.(French),.or.ESPAÑOL.(Spanish).  
4) Press.the.OK soft key. You will hear a confirmation tone.  
Your.Greeting  
Your.answering.machine.comes.with.a.pre-recorded.outgoing.message.or.greeting.that.plays.when.you.receive.a.  
call:  
"Hello,.no.one.is.available.to.take.your.call..Please.leave.a.message.after.the.tone.".  
Or.you.can.record.your.own.personal.outgoing.greeting..Your.recorded.greeting.must.be.between.2.seconds.and.30.  
seconds.long..Once.you.have.recorded.a.personal.greeting,.you.can.switch.back.and.forth.between.the.pre-record-  
ed.greeting.and.your.own.greeting..  
56  
 
 
From.the.base  
From.the.handset  
To.Record.a.Per-  
sonal.Greeting  
ꢀ) Press.the.MENU.soft.key..Select.the.  
ANSW..SETUP.menu.option,.then.the.  
RECORD.GREETING.submenu.  
ꢀ) With.the.phone.in.standby,.press.the..  
MENU.soft.key.  
2) Press.[ ].or.[ ].to.select.RETRIEVE.  
2) Press.[ ].or.[ ].to.select.LINEꢀ.or.  
MSG.  
LINE2.  
3) Press.the.LINE1.or.LINE2.soft.key..  
REMOTE.ANSWERINGMACHINE.  
OPERATION.appears.on.the.display,.  
and.the.answering.machine.announc-  
es.the.day.and.time,.and.the.number.  
of.new.and.old.messages..  
3) Press.the.START.soft.key.  
4) The.answering.machine.announces,.  
"Record.Greeting",.begin.recording.  
after.the.announcement.  
5) The.message.counter.on.the.base.  
displays."30",.and.then.begins.to.  
count.down.  
4) Press.[8]..  
5) The.answering.machine.announces,.  
"Record.Greeting",.begin.recording.  
after.the.announcement.  
6) When you finish recording, press the  
STOP.soft.key.or.you.will.hear.a.beep,.  
and.the.answering.machine.plays.  
back your greeting for confirmation.  
6) When you finish recording, press  
the.STOP.soft.key,.[5],.or.[8]..You.  
will.hear.a.beep,.and.the.answering.  
machine.plays.back.your.greeting.for.  
confirmation.  
57  
 
 
From.the.base  
From.the.handset  
To.Select.a.  
pre-recorded.  
Greeting  
ꢀ) With.the.phone.in.standby,.press.  
the.MENU.soft.key..Select.ANSW..  
SETUP.menu.option,.then.the.  
ꢀ) With.the.phone.in.standby,.press.the..  
MENU.soft.key..  
2) Press.[ ].or.[ ].to.select.RETRIEVE.  
GREETINGOPTIONS.submenu.  
MSG.  
2) Press.[ ].or.[ ].to.select.LINEꢀ.or.  
LINE2..The.answering.machine.plays.  
the.current.greeting.  
3) Press.the.LINE1.or.LINE2.soft.key..  
REMOTE.ANSWERINGMACHINE.  
OPERATION.appears.on.the.  
3) To.keep.this.greeting,.do.nothing.  
display,.and.the.answering.machine.  
announces.the.day.and.time,.and.the.  
number.of.new.and.old.messages..  
4) To.switch.to.the.other.greeting,.press.  
the.CHANGE.soft.key.while.the.  
answering.machine.is.playing.the.  
current.greeting.  
4) To.switch.to.the.other.greeting,.press.  
[6]..  
5) Each.time.you.press.the.CHANGE.  
soft.key,.the.answering.machine.  
switches.between.the.pre-recorded.  
and.the.personal.greeting..The.last.  
greeting.you.hear.is.used.as.the.  
current.greeting.  
5) Each.time.you.press.[6],.the.  
answering.machine.switches.between.  
the.pre-recorded.and.the.personal.  
greeting..The.last.greeting.you.hear.is.  
used.as.the.current.greeting..  
Deleting.your.Personal.Greeting.(Base.Only)  
You.can.delete.your.personal.greeting.from.the.base..You.cannot.delete.the.pre-recorded.greeting.  
ꢀ) When.the.phone.is.in.standby,.press.the.MENU.soft.key..Select.ANSW..SETUP.menu.option,.then.the.  
GREETINGOPTIONS.submenu.and.press.the.OK.soft.key..Press.[ ].or.[ ].to.select.LINEꢀ.or.LINE2..The.  
answering.machine.plays.the.current.greeting..  
2) While.the.personal.greeting.is.playing,.press.the.DELETE.soft.key..  
3) The.answering.machine.announces."Greeting.has.been.deleted".and.automatically.switches.back.to.the.pre-  
recorded.greeting...  
58  
 
 
Setting.the.Number.of.Rings  
The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.machine.plays.the.  
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS.  
setting),.the.answering.machine.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.  
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.second.ring.to.  
avoid.long.distance.billing.charges.  
ꢀ) Press.the.MENU.soft.key..Select.the.ANSW..SETUP.menu,.and.then.the.RING.TIME.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Move.the.cursor.to.select.a.Ring.Time.(2.TIMES,.4.TIMES,.6.TIMES.or.TOLL.SAVER).  
4) Press.the.OK soft key. You will hear a confirmation tone.  
Setting.the.Record.Time.(or.Announce.Only)  
You.can.choose.how.long.callers.have.to.record.a.message..Set.the.record.time.to.ꢀ.MINUTE.or.4.MINUTES.to.limit.  
the.record.time.for.incoming.messages..If.you.set.the.record.time.to.ANNOUNCE.ONLY,.the.answering.machine.an-  
swers.the.call.but.prevents.callers.from.leaving.a.message..  
ꢀ) Press.the.MENU.soft.key..Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.TIME.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Move.the.cursor.to.select.Record.Time.(ꢀ.MINUTE,.4.MINUTES,.or.ANNOUNCE.ONLY).  
4) Press.the.OK soft key. You will hear a confirmation tone.  
While.your.answering.system.is.set.to.ANNOUNCE.ONLY,.the.base.screen.will.display.ANNOUNCE.ONLY..If.you.  
are.using.the.prerecorded.greeting,.the.answering.machine.automatically.switches.to.the.following.message:."Hello,.  
no.one.is.available.to.take.your.call..Please.call.again.".If.you.are.using.a.personal.greeting,.the.answering.machine.  
continues.to.use.that.greeting.  
59  
 
 
Activating.the.Message.Alert.  
The.Message.Alert.feature.sounds.a.short.alert.tone.every.ꢀ5.seconds.whenever.you.have.a.new.message..To.turn.  
on.the.message.alert:.  
ꢀ) Press.the.MENU.soft.key..Select.the.ANSW..SETUP.menu,.and.then.the.MESSAGE.ALERT.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Move.the.cursor.to.select.ON.or.OFF.  
4) Press.the.OK soft key. You will hear a confirmation tone.  
Activating.Call.Screening.  
Your.phone.allows.you.to.listen.to.callers.leaving.you.a.message..This,.Call.Screen,.feature.can.be.turned.on.or.off..  
ꢀ) Press.the.MENU.soft.key..Select.the.ANSW..SETUP.menu.and.then.the.CALL.SCREEN.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Move.the.cursor.to.select.ON.or.OFF.  
4) Press.the.OK soft. You will hear a confirmation tone.  
Setting a Security Code or Personal Identification Number (PIN)  
To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number  
(PIN).or.PIN.Code.  
ꢀ) Press.the.MENU.soft.key..Select.the.ANSW..SETUP.menu,.and.then.the.SECURITY.CODE.submenu.  
2) Move.the.cursor.to.select. .or. ..Press.the.OK.soft.key.  
3) Enter.a.two-digit.security.code.(0ꢀ-99).using.the.number.keypad.[0-9].  
4) Press.the.OK soft. You will hear a confirmation tone.  
60  
 
 
Using.the.Answering.Machine  
The message counter on the base display shows the number of messages stored in memory. If the display flashes,  
then.there.are.new.messages.waiting.for.you.that.you.have.not.yet.listened.to..The.answering.machine.plays.your.  
new messages first. After you listen to all of your new messages, you can then play your old messages.  
Note:. Time.stamp.will.not.be.heard.until.you.have.set.the.time.  
Turning.your.Answering.Machine.On.and.Off  
From.the.base.  
From.the.handset.  
Turning.  
On  
ꢀ) With.the.phone.in.standby,.press.[ ].  
ꢀ) With.the.phone.in.standby,.press.the.  
MENU.soft.key..  
2) Press.the.LINE1.or.LINE2.soft.key.  
2) Press.[ ].or.[ ].to.select.RETRIEVE.  
3) The.answering.machine.announces."An-  
swering.System.is.on".and.plays.the.cur-  
rent.greeting.  
MSG.  
3) Press.the.LINE1.or.LINE2.soft.key..  
REMOTE.ANSWERINGMACHINE.OP-  
ERATION.appears.on.the.handset.display,.  
and.the.answering.machine.announces.  
the.day.and.time,.and.the.number.of.new.  
and.old.messages.  
4) The.message.counter.displays.the.num-  
ber.of.messages.stored.in.memory..If.the.  
counter flashes, then you have new mes-  
sages.waiting.  
4) Press.[9].at.any.time.during.the.announce-  
ment..  
5) The.answering.machine.announces."An-  
swering.System.is.on".and.plays.the.cur-  
rent.greeting.message.  
6ꢀ  
 
 
From.the.base.  
From.the.handset.  
Turning.  
Off  
ꢀ) With.the.phone.in.standby,.press.[ ].  
ꢀ) With.the.phone.in.standby,.press.the.  
MENU.soft.key..  
2) Press.the.LINE1.or.LINE2.soft.key.  
2) Press.[ ].or.[ ].to.select.RETRIEVE.  
3) The.phone.announces."Answering.System.  
MSG.  
is.off."  
3) Press.the.LINE1.or.LINE2.soft.key..  
REMOTE.ANSWERING.MACHINE.OP-  
ERATION.appears.on.the.handset.display,.  
and.the.answering.system.announces.the.  
day.and.time,.and.the.number.of.new.and.  
old.messages.  
4)  
appears.  
4) Press.[9].at.any.time.during.the.announce-  
ment..The.system.announces..  
"Answering.System.is.off."  
Reviewing.Messages  
When.you.have.a.new.message,.the.new.message.light.on.the.handset.blinks..The.light.stops.blinking.when.you.lis-  
ten to all of your new messages. The answering machine will play your new messages first. After you play all of your  
new.messages,.you.can.then.play.your.old.messages..  
62  
 
 
You.can.review.your.messages.from.the.base.or.from.the.handset:  
From.the.base.  
From.the.handset.  
Playing.your.mes-  
sages.  
ꢀ) Press.the.MENU.soft.key..  
ꢀ) Press.[ /exit]..  
2) Press.[ ].or.[ ].to.select.RETRIEVE.  
2) Press.the.LINE1.or.LINE2.soft.key..  
The.answering.machine.announces.  
the.number.of.new.and.old.messag-  
es..It.announces.the.message.num-  
ber,.plays.the.message,.and.then.an-  
nounces.the.day.and.time.that.mes-  
sage.was.received..  
MSG.  
3) Press.the.LINE1.or.LINE2.soft.key..  
REMOTE.ANSWERING.MACHINE.  
OPERATION.appears.on.the.handset.  
display,.and.the.answering.machine.  
announces.the.day.and..time,.and.the.  
number.of.new.and.old.messages..  
Press.[  
].to.play.your.messages..  
/2  
After.playing.the.message,.the.an-  
swering.machine.announces.the.day.  
and.time.that.message.was.received..  
Repeating.a.mes-  
sage.  
Press.[ /1].once.to.go.to.the.beginning.of.  
the.current.message..Press.[ /1].repeat-  
edly.to.go.back.to.a.previous.message..  
].or.the. soft.key.repeatedly.to.go.back.  
Press.[ ].or.the. soft.key.once.to.go.to.  
the.beginning.of.the.current.message..Press.  
[
to.a.previous.message..Press.and.hold.to.  
rewind.through.the.current.message..  
Skipping.a.message. Press.[ ].or.the. .soft.key.to.go.to.the.be- Press.[ /3].to.go.to.the.beginning.of.the.  
ginning.of.the.next.message..Press.and.hold. next.message..Press.and.hold..  
to.fast.forward.through.the.current.message..  
[
/3] to.fast.forward.through.the.current.  
message..  
Deleting.a.message. While.a.message.is.playing,.press..  
While.a.message.is.playing,.press.[  
].  
/4  
[ ].or.the.DELETE.soft.key.to.delete.it..The. to.delete.it..The.message.is.permanently.  
message.is.permanently.deleted.. deleted..  
63  
 
 
From.the.base.  
From.the.handset.  
Deleting.all.mes-  
sages.  
ꢀ) With.the.phone.in.standby,.press..  
Not.available  
[ ].to.delete.all.messages.  
2) Press.the.LINE1.or.LINE2.soft.key..  
All.messages.are.permanently.de-  
leted.  
Stopping.a.message.  
review.  
Press.[ /exit].to.stop.a.message.playback. Press.[ /5].or.the.STOP.soft.key.to.stop.  
and.return.to.standby..  
a.message.playback..Press.[ ].to.exit.and.  
return.to.standby..  
Note:  
You.cannot.delete.unheard.messages..If.you.try.to.delete.messages.before.listening.to.them,.the.answering.  
machine.will.beep.and.say.“Please.playback.all.messages.”  
• If.you.press.[ ].or.the. soft key on the base during the first two seconds (or press [ /1].on.the.handset.  
during the first four seconds) of a message, the answering machine goes back to the previous message.  
64  
 
Screening.Calls  
Your.phone.allows.you.to.listen.to.callers.leaving.a.message.without.answering.the.phone..You.can.always.hear.call-  
ers.from.the.base.speaker..To.screen.an.incoming.call.from.the.handset.and.base:.  
From.the.base.  
From.the.handset.  
ꢀ) Press.the.SCREEN.soft.key.or.the.MUTE.soft.  
key.when.the.answering.machine.is.answer-  
ing..If.another.station.is.screening.a.call,.you.will.  
hear.a.beep.and.you.will.not.be.able.to.screen.  
the.call.  
ꢀ) Press.the.SCREEN.soft.key.when.the.answer-  
ing.machine.is.answering..If.another.station.is.  
screening.a.call,.you.will.hear.a.beep.and.you.  
will.not.be.able.to.screen.the.call.  
2) To.answer.the.call,.press.[ /flash].  
2) To.answer.the.call,.pick.up.the.base.corded.  
3) To.mute.the.call.screen,.press.the.MUTE.soft.  
handset,.or.press.[ ].  
key.  
3) To.mute.the.call.screen,.press.the.MUTE.soft.  
key,.or.[ /exit]..To.cancel.muting,.press.the.  
SCREEN.soft.key.  
4) To.cancel.the.call.screen,.press.[ ].  
4) To.cancel.the.call.screen,.press.the.MUTE.soft.  
key.  
65  
 
 
Recording.a.Conversation  
You.can.record.a.conversation.between.2.seconds.and.ꢀ0.minutes.long.from.the.handset.or.the.base..These.record-  
ed.conversations.are.treated.just.like.regular.messages..When.the.answering.machine.is.full,.FULL.will.appear.on.  
the.base.display.and.recording.will.be.terminated..You.can.not.record.3-way.calls.or.intercom.conversations.with.this.  
feature..  
From.the.base.  
From.the.handset.  
Starting.a.Record-  
ing  
ꢀ) During.a.conversation,.press.the.  
MENU.soft.key.then.select..  
CALL.RECORD..Press.the.OK.soft.  
key.  
ꢀ) During.a.conversation,.press.the..  
MENU.soft.key,.and.then.[ ].or.[ ].  
key.to.select.CALL.RECORD..Press.  
the.OK.soft.key.)  
2) RECORDING.CALL.will.appear.on.the.  
display. A confirmation tone that can  
be.heard.by.both.parties.sounds.dur-  
ing.recording..Press.the.OK.soft.key.  
2) RECORDING.CALL.will.appear.on.the.  
display. A confirmation tone that can  
be.heard.by.both.parties.sounds.dur-  
ing.recording.  
Stopping.a.record-  
ing  
ꢀ) Press.the.MENU.soft.key.then.select.  
ꢀ) Press.the.MENU.soft.key,.and.  
then.[ ].or.[ ].key.to.select.CALL.  
RECORD..Press.the.OK.soft.key.)  
CALL.RECORD..  
2) STOP.RECORDING.appears.on.the.  
display, and you will hear a confirma-  
tion.tone.  
2) STOP.RECORDING.appears.on.the.  
display, and you will hear a confirma-  
tion.tone.  
Note:.  
• Every.state.has.different.regulations.governing.the.recording.of.conversations.over.the.telephone..Make.sure.  
to.check.your.local,.state.and.federal.laws.before.using.this.product.to.record.any.telephone.conversation.in.  
order.to.determine.that.your.use.is.in.compliance.with.such.laws.or.guidelines.  
• If.the.recording.memory.is.full,.UNAVAILABLE.appears.in.the.display..You.cannot.record.a.conversation.until.  
you.clear.some.messages.from.the.memory.  
You.cannot.record.intercom.conversations.  
66  
 
 
Recording.a.Voice.Memo  
The.voice.memo.feature.allows.you.to.record.messages.that.are.between.2.seconds.and.4.minutes.long..You.might.  
want.to.use.this.feature.to.leave.messages.for.other.members.of.your.household.instead.of.written.notes..  
From.the.base.  
From.the.handset.  
Starting.a.memo  
ꢀ) With.the.phone.in.standby,.press.  
ꢀ) With.the.phone.in.standby,.press.  
the.RECORD.soft.key..  
the.MENU.soft.key..  
2) Press.the.LINE1.or.LINE2.soft.key.  
2) Press.[ ].or.[ ].to.select.RE-  
TRIEVE.MSG.  
3) Press.the.START.soft.key.  
3) Press.the.LINE1.or.LINE2.soft.key.  
4) The.answering.machine.announc-  
es."Record.memo.message.".Begin.  
your.message.after.this.announce-  
ment.and.a.beep.  
4) REMOTE.ANSWERING..  
MACHINE.OPERATION.appears.  
on.the.display,.and.the.answering.  
machine.announces.the.day.and.  
time,.and.the.number.of.new.and.  
old.messages..  
5) Press.[7]..The.answering.machine.  
announces."Record.memo.mes-  
sage.".Begin.your.message.after.  
this.announcement.  
Stopping.a.memo  
ꢀ) Press.the.STOP.soft.key.  
ꢀ) Press.[7].  
2) You hear a confirmation tone, and  
2) You will hear a confirmation tone,  
and.the.answering.machine.waits.  
for.your.next.command.  
the.system.returns.to.standby.  
3) Press.[ /2].to.hear.the.message.  
you.just.recorded.or.[ ].to.exit.and.  
return.to.standby.  
67  
 
 
Message.Alert  
The.Message.Alert.feature.sounds.a.short.alert.tone.whenever.you.have.a.new.message..When.a.new.message.is.  
received.and.Message.Alert.is.on,.the.alert.tone.will.sound.every.ꢀ5.seconds..Set.the.Message.Alert.to.on.or.off.by.  
using.MENU..To.activate.the.message.alert,.see.page.60.for.details.  
When.all.new.messages.are.played.back.(see.page.63),.the.Message.Alert.tone.will.automatically.deactivate..The.  
tone.will.not.deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.Message.Alert.tone,.press.any.  
key.on.the.base.  
68  
 
 
Remotely.Operating.Your.Answering.Machine  
You.can.access.your.answering.machine.while.you.are.away.from.home.to.check,.play,.delete.messages,.or.even.  
record.a.new.greeting.message.or.to.turn.your.answering.machine.on.and.off.  
To.operate.from.a.remote.location,.use.any.touch-tone.telephone.and.follow.these.steps:.  
ꢀ) Call.your.telephone.number.and.wait.for.the.answering.machine.to.answer..If.the.answering.machine.is.off,.it.  
will.answer.after.about.ꢀ0.rings.and.a.series.of.beeping.sounds.  
2) During.the.greeting.message.(or.a.series.of.beeps.when.the.answering.machine.is.off),.press.[0].and.enter.  
your PIN code within 2 seconds (see "Setting a Security Code or Personal Identification Number (PIN)" on  
3) The.answering.machine.announces.the.current.time.and.the.number.of.messages.stored.in.memory..You.  
hear."To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero.".You.will.hear.a.beep.  
4) Enter.a.remote.command.within.ꢀ5.seconds,.each.command.there.after.must.be.entered.within.2.seconds..  
You.may.select.a.command.from.the.following.chart:  
69  
 
 
Remote.Commands  
Command  
0.then.1  
Function  
Repeat.a.Message*  
Playback.Messages  
Skipping.a.Message  
Deleting.a.Message  
Stop.Operation  
Command  
Function  
Answering.System.On  
Memo.Record/Stop**  
Greeting.Record/Stop**  
Answer.System.Off  
Help.Guidance  
0.then.6  
0.then.2  
0.then.7  
0.then.8  
0.then.9  
1.then.0  
0.then.3  
0.then.4  
0.then.5  
*.To.Repeat.a.Message,.press.[0].then.[1].within.four.seconds.to.repeat.the.previous.message,.or.press.[0].then.[1].  
after.four.seconds.to.repeat.the.current.message.  
** For the Memo Record and Greeting Record/Stop, the first time you enter the corresponding command, it starts the  
Recording..If.you.want.to.stop.the.recording,.press.[0].then.[7],.[8],.or.[5].  
5) When you finish, you will hear intermittent beeps indicating that the answering machine is in the command  
waiting.mode..You.can.enter.another.command.from.the.chart,.or.you.can.hang.up.to.exit.the.answering.ma-  
chine..  
6) When.you.hang.up,.the.answering.machine.automatically.returns.to.its.normal.standby.setting.  
Note:  
• The.system.will.only.playback.messages.for.four.minutes.and.then.it.returns.to.the.command-waiting.mode.  
To.continue.playing.your.messages,.press.[0].then.[2].again.within.ꢀ5.seconds.  
• If.you.enter.an.incorrect.security.code.three.times,.you.will.hear.a.beep.and.the.answering.machine.will.return.  
to.standby.  
70  
 
Maintenance  
Specifications  
Operating.Temperature  
0°.C.to.50°.C.(32°.F.to.ꢀ22°.F)  
Base:.AD-800  
AC.Adapter.Part.Number  
Input.Voltage  
Charging.Cradle:.AD-0005  
Base:.ꢀ20V.AC,.60.Hz  
Charging.Cradle:.ꢀ20V.AC,.60.Hz  
Base:.9V.DC.@.350mA  
Output.Voltage  
Charging.Cradle:.9V.DC.@.2ꢀ0mA  
Battery.Part.Number  
Capacity  
BT-446  
3.6V.DC.@.800mAh  
Notes:  
• Use.only.the.supplied.AD-800.and.AD-0005.AC.adapters.  
• Do.not.use.any.other.AC.adapter.  
• Do.not.place.the.power.cord.where.it.creates.a.trip.hazard.or.where.it.could.become.chafed.and.create.a.  
fire or electrical hazard.  
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.  
Usage.During.Power.Failures  
While.your.power.is.off,.you.can.make.or.receive.calls.with.the.base.corded.handset.(Line.ꢀ.only)..You.cannot..use.  
the.base.speakerphone.or.the.cordless.handset.to.make.calls.during.a.power.outage..Additionally,.if.the.power.goes.  
out.while.you.are.using.Line.2,.your.call.will.be.disconnected;.however,.if.you.are.on.line.ꢀ,.your.call.will.continue.un-  
til.you.hang.up.  
7ꢀ  
 
 
Battery.Replacement.and.Handling.  
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.  
contact.Uniden’s.Parts.Department..The.contact.information.is.listed.on.the.back.cover.page..  
Cleaning.the.Battery.Contacts  
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.  
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.  
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.  
thoroughly.before.returning.the.handset.to.the.charging.cradle.  
Caution:.Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..Do-  
ing so may discolor the surface of the telephone and damage the finish.  
Warning  
To avoid the risk of personal injury or property damage from fire or electrical shock, use only Uniden AD-800 (9V  
350mA).and.AD-0005.AC.adapters.and.Uniden.BT-446.battery.pack.with.your.phone..  
Caution:.  
Use only the specified Uniden battery pack BT-446.  
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..  
Never throw the battery into a fire, disassemble, or heat them.  
• Do.not.remove.or.damage.the.battery.casing..  
• A.replacement.Uniden.adapter.or.battery.may.be.purchased.by.calling.Uniden’s.Parts.department..See.back.  
cover.page.for.contact.information.  
72  
 
 
Low.Battery.Alert.  
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.or-  
der.to.save.power..When.Low.Battery.appears.in.the.display.and.the.phone.is.in.standby,.  
none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.your.conversation.as.quickly.  
as.possible,.and.return.the.handset.to.the.charging.cradle.  
Low Battery  
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.  
Talk.and.Standby.Times  
With.average.use,.your.handset.battery.provides.approximately.5.hours.of.talk.time.and.approximately.7.days.of.  
standby.time..When.your.handsets.are.not.being.used.and.are.left.off.of.their.charging.cradles,.the.battery.will.grad-  
ually.discharge..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.charging.  
cradle.after.each.use..If.the.handset.is.left.off.of.the.charging.cradle,.the.actual.talk.time.duration.will.be.reduced.re-  
spective.to.the.amount.of.time.the.handset.is.off.of.the.charging.cradle..  
73  
 
 
Troubleshooting  
Resetting.the.Handset  
You.may.need.to.reset.your.handset.in.the.following.instances:.  
You.lose.a.handset.and.purchase.a.new.one..When.you.try.and.register.to.your.existing.base.you.get.regis-  
tration.failure..  
You.are.unable.to.register.any.handsets.to.the.base..  
You.had.a.base.which.needed.to.be.exchanged.by.the.manufacturer..When.you.register.your.existing.hand-  
sets.to.the.base,.the.handsets.say.#3.and.#4,.but.you.only.have.2.handsets.  
• When.you.are.instructed.to.by.the.one.of.the.manufacturer’s.call.center.representatives..  
To.reset,.do.the.following:.  
ꢀ) Press.and.hold.[ ].and.[#].for.more.than.5.seconds..Select.DEREGISTER.HS..  
2) WHICH.HANDSET?.appears..Select.the.handset.that.you.want.to.de-register,.and.press.the.OK.soft.key.  
3) DEREGISTER.HS.appears..Select.YES,.and.press.the.OK.soft.key..  
4) ARE.YOU.SURE?.appears..Select.YES,.and.press.the.OK soft key. You will hear a confirmation tone. The  
handset.will.clear.its.registration.information.from.the.base,.and.then.delete.its.own.base.information..The.  
handset.displays:  
MODELS.VARY!.PLACE.HANDSET.ON.THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL..To.  
re-register.the.handset.to.the.base.(see.page.23)..  
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.  
base.and.the.base.is.connected.to.power.  
Note:.It.is.also.possible.to.reset.the.handset.back.to.its.original.factory.settings..All.changes.including.Caller.ID.infor-  
mation.will.be.erased..For.more.information.on.resetting.the.handset.back.to.factory.settings.and.when.you.need.to.  
do.this,.see.www.uniden.com.or.call.our.Customer.Service.Hotline..See.back.cover.page.for.contact.information.  
74  
 
 
Resetting.the.Handset.without.the.Base  
If.your.original.base.is.not.available.for.some.reason.(for.example,.it.is.lost.or.somehow.incapacitated),.you.can.still.  
reset.the.handset.and.use.it.with.another.base..  
ꢀ) Press.and.hold.[ ].and.[#].for.more.than.5.seconds..  
2) Move.the.cursor.to.select.BASE.UNAVAILABLE.and.then.press.the.OK.soft.key..  
Base Unavailable  
Yes  
No  
BASE.UNAVAILABLE.appears.  
3) Move.the.cursor.to.select.YES,.and.then.press.the.OK.soft.key..ARE.YOU.SURE?.  
BACK  
DELETE  
OK  
appears.  
4) Move.the.cursor.to.select.YES,.and.then.press.the.OK soft key. You will hear a confirmation tone. The hand-  
set.will.delete.its.own.base.information.without.trying.to.contact.the.base..When.the.base.information.is.delet-  
ed,.the.handset.displays.MODELS.VARY!.PLACE.HANDSET.ON.THE.BASE.FOR.REGISTRATION.OR.RE-  
FER.TO.OWNER’S.MANUAL..Register.the.handset.to.the.new.base.(see.page.23).  
Changing.the.Digital.Security.Code  
The digital security code is an identification code used to connect the handset and the base. Your unit ships from the  
manufacturer.with.a.preset.security.code..Resetting.this.code.is.not.normally.necessary..In.the.rare.situation.that.you.  
suspect.another.cordless.telephone.is.using.the.same.security.code.or.if.you.are.instructed.to.change.this.code.by.a.  
manufacturer’s.Call.Center.Representative,.you.can.change.the.code.by:  
ꢀ) Perform.“Resetting.the.Handset”.for.all.of.your.handsets..  
2) Re-register.each.handset.by.following.the.steps.on.page.23.  
Traveling.Out.of.Range  
During.a.call,.if.you.move.your.handset.too.far.away.from.your.base,.noise.may.increase..If.you.pass.the.range.limits.  
of.the.base,.you.will.hear.a.beep.and.see.OUT.OF.RANGE.on.the.display,.and.then.the.handset.returns.to.standby.  
75  
 
 
Common.Issues  
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve  
your.problem,.please.call.our.Customer.Hotline..See.back.cover.page.for.contact.information..  
Symptom  
Suggestion  
The.charge.light.won’t.  
illuminate.when.the.handset.is.  
placed.in.the.cradle..  
• Make.sure.the.AC.adapter.is.plugged.into.the.charger.and.wall.outlet.  
• Make.sure.the.handset.is.properly.seated.in.the.cradle.  
• Make.sure.the.charging.contacts.on.the.handset.are.clean..  
The.audio.sounds.weak.  
• Move.the.handset.and/or.base.away.from.metal.objects.or.appliances.and.  
try.again.  
• Make.sure.that.you.are.not.too.far.from.the.base..  
Can’t.make.or.receive.calls.  
• Make.sure.that.you.are.not.too.far.from.the.base..  
• Make.sure.the.line.is.not.in.use..If.an.outside.call.is.already.using.a.line,.  
you.cannot.use.that.line.to.make.another.outside.call.  
• Check.both.ends.of.the.base.telephone.line.cord.  
• Make.sure.the.AC.adapter.is.plugged.into.the.base.and.a.wall.outlet.  
• Disconnect.the.AC.adapter.and.reconnect.  
• Change.the.Digital.Security.Code.(see.page.75)..  
The.handset.doesn’t.ring.or.  
receive.a.page.  
• Make.sure.that.you.are.not.too.far.from.the.base..  
• Charge.the.battery.in.the.handset.for.at.least.5-20.hours.by.placing.the.  
handset.on.the.base.or.charging.cradle.  
• Change.the.Digital.Security.Code.(see.page.75)..  
During.power.failure,.can't.  
make.or.receive.a.call.  
• Make.sure.to.use.the.base.corded.handset.to.make.or.receive.a.call.  
Make sure that TEL line cord is connected firmly.  
76  
 
 
Symptom  
Suggestion  
Severe.noise.interference.  
• Keep.the.handset.away.from.microwave.ovens,.computers,.remote.control.  
toys,.wireless.microphones,.alarm.systems,.intercoms,.room.monitors,.  
fluorescent lights, and electrical appliances.  
• Move.to.another.location.or.turn.off.the.source.of.interference..  
The.Caller.ID.does.not.  
display..  
• The.call.was.placed.through.a.switchboard..  
• Call.your.telephone.provider.to.verify.your.Caller.ID.service.is.current..  
There.may.be.a.problem.with.your.Caller.ID.service..  
You.cannot.register.the.  
handset.at.the.base..  
• Charge.the.battery.pack.in.the.handset.for.ꢀ5-20.hours.  
• Change.the.Digital.Security.Code.(see.page.75).  
• Make.sure.you.have.not.stored.ꢀ0.handsets.already.  
The.handset.doesn’t.commu-  
nicate.with.other.handsets..  
• Change.the.Digital.Security.Code.(see.page.75).  
• Make.sure.that.you.have.registered.all.handsets..  
An.extra.handset.can’t.join.the.  
conversation.  
• Make.sure.there.are.not.4.handsets.already.using.the.conference.feature..  
• Make.sure.that.another.station.is.not.in.privacy.mode..  
The.Room.Monitor.feature.  
does.not.work..  
• Make.sure.to.place.the.handset.(s).within.the.range.of.the.base.  
• Make.sure.that.the.Room.Monitor.feature.is.turned.on..  
The.answering.machine.does.  
not.work.  
• Make.sure.the.base.is.plugged.in.  
• Make.sure.that.the.answering.machine.is.turned.on.  
• Make.sure.that.the.message.record.time.is.not.set.to.Announce.only.(see.  
page.59).  
Messages.are.incomplete..  
• The.incoming.messages.may.be.too.long..Remind.callers.to.leave.a.brief.  
message.  
• The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages..  
77  
 
Symptom  
Suggestion  
There.is.no.sound.on.the.  
base.or.handset.speaker.  
during.call.monitoring.or.mes-  
sage.playback.  
• Adjust.the.speaker.volume.on.the.base.or.handset.  
• Make.sure.the.call.screen.feature.is.set.to.on..  
Cannot.access.remote.fea-  
tures.from.another.touchtone.  
phone..  
• Make.sure.you.are.using.the.correct.PIN.number.  
• Make.sure.that.the.touch-tone.phone.you.are.using.can.transmit.the.tone.  
for.at.least.two.seconds..If.it.cannot,.you.may.have.to.use.another.phone.  
to.access.your.phone...  
Time.stamp.cannot.be.heard..  
• Make.sure.you.have.set.the.time.(see.Setting.the.Date.and.Time..  
on.page.ꢀ9)...  
78  
 
Liquid.Damage.  
Moisture.and.liquid.can.damage.your.cordless.phone..Follow.the.suggestions.below.if.your.phone.gets.wet.  
Exterior  
If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.the.  
liquid,.and.use.as.normal.  
Interior  
If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.  
handset.battery.compartment.or.vent.openings.on.the.base):  
Handset:  
. Remove.the.battery.cover.and.leave.it.off.for.ventilation..  
2. Disconnect.the.battery.pack..Leave.the.battery.cover.off.and.the.battery.pack.disconnected.for.at.least.3.  
days..  
3. Once.the.handset.is.completely.dry,.reconnect.the.battery.pack.and.the.battery.cover..  
4. Recharge.the.handset's.battery.pack.for.ꢀ5.to.20.hours.before.using..  
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption..  
Base:.  
. Disconnect.the.AC.adapter.from.the.base,.cutting.off.electrical.power..  
2. Disconnect.the.telephone.cord.from.the.base..  
3. Let.dry.for.at.least.3.days.  
CAUTION:.DO.NOT.use.a.microwave.oven.to.speed.up.the.drying.process..This.will.cause.permanent.damage.to.  
the.handset,.base.and.the.microwave.oven..After.following.these.steps,.if.your.cordless.telephone.does.not.work,.  
please.call.our.Customer.Service.Hotline..See.back.cover.page.for.contact.information..  
79  
 
 
Precautions!.  
Before.you.read.anything.else,.please.observe.the.following:  
Warning!.  
Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical  
shock,.or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.moisture..  
Rechargeable.Nickel-Metal-Hydride.Battery.Warning.  
• This.equipment.contains.a.rechargeable.Nickel-Metal-Hydride.battery..  
The rechargeable batteries contained in this equipment may explode if disposed of in a fire.  
• Nickel.is.a.chemical.known.to.State.of.California.to.cause.cancer..  
• Do.not.short-circuit.the.battery..  
Do not charge the rechargeable battery used in this equipment in any charger other than the one specified in  
the.owner’s.manual..Using.another.charger.may.damage.the.battery.or.cause.the.battery.to.explode..  
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.Properly.  
The exclamation point within an equilater-  
al triangle is intended to alert the user to the  
presence of important operating and mainte-  
nance (servicing) instructions in the literature  
accompanying the appliance.  
!
80  
 
 
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.in.our.products.and.accessories.  
Warning!.  
The.cords.on.this.product.and/or.accessories.contain.lead,.a.chemical.known.to.the.State.of.California.to.cause.birth.  
defects.or.other.reproductive.harm..Wash.hands.after.handling.  
Important.Safety.Instructions  
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire,  
electric.shock.and.injury.to.persons,.including.the.following:.  
. Do.not.use.this.product.near.water,.for.example,.near.a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.  
wet.basement.or.near.a.swimming.pool..  
2. Avoid.using.a.telephone.(other.than.a.cordless.type).during.an.electrical.storm..There.may.be.a.remote.risk.of.  
electric.shock.from.lightning..  
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.vicinity.of.the.leak..  
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may  
explode..Check.with.local.authorities.for.possible.battery.disposal.instructions..  
5. Do.not.disassemble.any.component.of.this.product..  
SAVE.THESE.INSTRUCTIONS  
CAUTION  
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..Dispose.of.used.batteries.according.to.the.instructions..  
Do.not.open.or.mutilate.the.battery,.and.disconnect.the.battery.before.shipping.this.product..  
8ꢀ  
 
 
The.FCC.Wants.You.To.Know.  
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.replacement.  
section);.otherwise.do.not.substitute.or.repair.any.parts.of.the.device.  
except as specified in this manual. Connection to party line service is  
subject.to.state.tariffs..Contact.the.state.public.utility.commission,.public.  
service.commission.or.corporation.commission.for.information..This.  
equipment.is.hearing.aid.compatible.  
This. equipment. complies. with. Part. 68. of. the. FCC. rules. and. the.  
requirements.adopted.by.the.ACTA..On.the.bottom.of.this.equipment.is.  
a label that contains, among other information, a product identifier in the  
format.US:AAAEQ##TXXXX..If.requested,.this.number.must.be.provided.  
to.the.telephone.company.  
Should.you.experience.trouble.with.this.equipment,.please.contact.  
Uniden.customer.service.at.800-297-ꢀ023..If.the.equipment.is.causing.  
harm.to.the.telephone.network,.the.telephone.company.may.request.that.  
you.disconnect.the.equipment.until.the.problem.is.resolved..  
An applicable Universal Service Order Codes (USOC) certification for the  
jacks.used.in.this.equipment.is.provided.(i.e.,.RJꢀꢀC).in.the.packaging.  
with.each.piece.of.approved.terminal.equipment..A.plug.and.jack.used.  
to.connect.this.equipment.to.the.premises.wiring.and.telephone.network.  
must.comply.with.the.applicable.FCC.Part.68.rules.and.requirements.  
adopted.by.the.ACTA..A.compliant.telephone.cord.and.modular.plug.is.  
provided.with.this.product..It.is.designed.to.be.connected.to.a.compatible.  
modular.jack.that.is.also.compliant..See.installation.instructions.for.  
details.  
NOTICE:.According.to.telephone.company.reports,.AC.electrical.surges,.  
typically.resulting.from.lightning.strikes,.are.very.destructive.to.telephone.  
equipment.connected.to.AC.power.sources..To.minimize.damage.from.  
these.types.of.surges,.a.surge.arrestor.is.recommended.  
Changes.or.modifications.to.this.product.not.expressly.approved.by.  
Uniden,.or.operation.of.this.product.in.any.way.other.than.as.detailed.by.  
the.owner’s.manual,.could.void.your.authority.to.operate.this.product.  
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.  
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.  
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.call..In.  
most but not all areas, the sum of RENs should not exceed five (5.0).  
To.be.certain.of.the.number.of.devices.that.may.be.connected.to.a.line,.  
as.determined.by.the.total.RENs,.contact.the.telephone.provider..For.  
products.approved.after.July.23,.200ꢀ,.the.REN.for.this.product.is.part.  
of the product identifier that has the format US:AAAEQ##TXXXX. The  
digits.represented.by.##.are.the.REN.without.a.decimal.point.(e.g.,.03.is.  
a.REN.of.0.3)..For.earlier.products,.the.REN.is.separately.shown.on.the.  
label.  
This.device.complies.with.part.ꢀ5.of.the.FCC.rules..Operation.is.subject.  
to.the.following.two.conditions:.(ꢀ).This.device.may.not.cause.harmful.  
interference,.and.(2).This.device.must.accept.any.interference.received,.  
including.interference.that.may.cause.undesired.operation..Privacy.of.  
communications.may.not.be.ensured.when.using.this.phone.  
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.for.  
the.amount.of.radio.frequency.energy.various.products.may.produce.  
depending.on.their.intended.usage..This.product.has.been.tested.  
and.found.to.comply.with.the.FCC’s.exposure.criteria..For.body.worn.  
operation,.the.FCC.RF.exposure.guidelines.were.also.met.when.used.  
with.the.Uniden.accessories.supplied.or.designed.for.this.product..Use.  
of.other.accessories.may.not.ensure.compliance.with.FCC.RF.exposure.  
guidelines.and.should.be.avoided.  
If.this.equipment.causes.harm.to.the.telephone.network,.the.telephone.  
company.will.notify.you.in.advance.that.temporary.discontinuance.  
of.service.may.be.required..But.if.advance.notice.isn’t.practical,.the.  
telephone.company.will.notify.the.customer.as.soon.as.possible..Also,.  
you will be advised of your right to file a complaint with the FCC if you  
believe.it.is.necessary.  
The.telephone.company.may.make.changes.in.its.facilities,.equipment,.  
operations. or. procedures. that. could. affect. the. operation. of. the.  
equipment..If.this.happens.the.telephone.company.will.provide.advance.  
notice.in.order.for.you.to.make.necessary.modifications.to.maintain.  
uninterrupted.service.  
82  
 
 
Radio.Interference.  
I.C..Notice  
Radio.interference.may.occasionally.cause.buzzing.and.humming.in.  
your.cordless.handset,.or.clicking.noises.in.the.base..This.interference.  
is.caused.by.external.sources.such.as.TV,.refrigerator,.vacuum.cleaner,.  
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If  
these.noises.continue.and.are.too.distracting,.please.check.around.your.  
home.to.see.what.appliances.may.be.causing.the.problem..In.addition,.  
we.recommend.that.the.base.not.be.plugged.into.a.circuit.that.also.  
powers.a.major.appliance.because.of.the.potential.for.interference..Be.  
certain.that.the.antenna.on.the.unit.is.fully.extended.when.needed..In.  
the.unlikely.event.that.you.consistently.hear.other.voices.or.distracting.  
transmissions.on.your.phone,.you.may.be.receiving.radio.signals.from.  
another.cordless.telephone.or.other.source.of.interference..If.you.cannot.  
eliminate.this.type.of.interference,.you.need.to.change.to.a.different.  
channel.  
Terminal.Equipment  
NOTICE:.This.equipment.meets.the.applicable.Industry.Canada.Terminal.  
Equipment Technical Specifications. This is confirmed by the registration  
number. The abbreviation, IC, before the registration number signifies  
that.registration.was.performed.based.on.a.Declaration.of.Conformity.  
indicating that Industry Canada technical specifications were met. It does  
not.imply.that.Industry.Canada.approved.the.equipment.  
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.terminal.  
equipment.is.marked.on.the.equipment.itself..The.REN.assigned.to.  
each.terminal.equipment.provides.an.indication.of.the.maximum.number.  
of.terminals.allowed.to.be.connected.to.a.telephone.interface..The.  
termination.on.an.interface.may.consist.of.any.combination.of.devices.  
subject.only.to.the.requirement.that.the.sum.of.the.Ringer.Equivalence.  
Numbers of all the devices does not exceed five.  
Finally,.it.should.be.noted.that.some.cordless.telephones.operate.at.  
frequencies.that.may.cause.interference.to.nearby.TVs.and.VCRs..  
To.minimize.or.prevent.such.interference,.the.base.of.the.cordless.  
telephone.should.not.be.placed.near.or.on.top.of.a.TV.or.VCR..If.  
interference.is.experienced,.moving.the.cordless.telephone.farther.away.  
from.the.TV.or.VCR.will.often.reduce.or.eliminate.the.interference..  
RADIO.EQUIPMENT  
The.term.IC:”.before.the.radio.certification.number.only.signifies.that.  
Industry Canada technical specifications were met.  
Cordless.Telephone.Privacy  
Operation.is.subject.to.the.following.two.conditions:.(ꢀ).this.device.may.  
not.cause.interference,.and.(2).this.device.must.accept.any.interference,.  
including.interference.that.may.cause.undesired.operation.of.the.device..  
“Privacy.of.communications.may.not.be.ensured.when.using.this.telephone.”  
Cordless.telephones.are.radio.devices..Communications.between.  
the.handset.and.base.of.your.cordless.telephone.are.accomplished.  
by.means.of.radio.waves.which.are.broadcast.over.the.open.airways..  
Because. of. the. inherent. physical. properties. of. radio. waves,. your.  
communications.can.be.received.by.radio.receiving.devices.other.than.  
your.own.cordless.telephone.unit..Consequently,.any.communications.  
using.your.cordless.telephone.may.not.be.private.  
83  
 
 
INCLUDING,. BUT. NOT. LIMITED. TO. ANY. IMPLIED.  
WARRANTIES.OF.MERCHANTABILITY.OR.FITNESS.FOR.  
A. PARTICULAR. PURPOSE.. THIS. WARRANTY. DOES.  
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.  
OR. PAYMENT. OF. INCIDENTAL. OR. CONSEQUENTIAL.  
DAMAGES.. Some. states. do. not. allow. this. exclusion. or.  
limitation.of.incidental.or.consequential.damages.so.the.above.  
limitation.or.exclusion.may.not.apply.to.you.  
One.Year.Limited.Warranty  
Important:. Evidence. of. original. purchase. is. required. for.  
warranty. service.. WARRANTOR:. UNIDEN. AMERICA.  
CORPORATION. (“Uniden”). ELEMENTS. OF. WARRANTY:.  
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.  
this.Uniden.Product.to.be.free.from.defects.in.materials.and.  
craftsmanship.with.only.the.limitations.or.exclusions.set.out.  
below..WARRANTY.DURATION:.This.warranty.to.the.original.  
user.shall.terminate.and.be.of.no.further.effect.2.months.  
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.  
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.  
or.necessary,.(B).modified,.altered,.or.used.as.part.of.any.  
conversion kits, subassemblies, or any configurations not sold  
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.  
someone.other.than.an.authorized.Uniden.service.center.for.a.  
defect.or.malfunction.covered.by.this.warranty,.(E).used.in.any.  
conjunction.with.equipment.or.parts.or.as.part.of.any.system.  
not.manufactured.by.Uniden,.or.(F).installed.or.programmed.  
by.anyone.other.than.as.detailed.by.the.owner’s.manual.for.  
this.product..STATEMENT.OF.REMEDY:.In.the.event.that.the.  
product.does.not.conform.to.this.warranty.at.any.time.while.this.  
warranty.is.in.effect,.warrantor.will.either,.at.its.option,.repair.or.  
replace.the.defective.unit.and.return.it.to.you.without.charge.for.  
parts,.service,.or.any.other.cost.(except.shipping.and.handling).  
incurred.by.warrantor.or.its.representatives.in.connection.with.  
the.performance.of.this.warranty..Warrantor,.at.its.option,.may.  
replace.the.unit.with.a.new.or.refurbished.unit..THE.LIMITED.  
WARRANTY.SET.FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.  
WARRANTY.PERTAINING.TO.THE.PRODUCT.AND.IS.IN.  
LIEU.OF.AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.  
ANY. NATURE. WHATSOEVER,. WHETHER. EXPRESS,.  
IMPLIED.OR.ARISING.BY.OPERATION.OF.LAW,  
LEGAL.REMEDIES:.This.warranty.gives.you.specific.legal.  
rights,.and.you.may.also.have.other.rights.which.vary.from.  
state.to.state..This.warranty.is.void.outside.the.United.States.  
of.America. and. Canada.. PROCEDURE. FOR. OBTAINING.  
PERFORMANCE. OF. WARRANTY:. If,. after. following. the.  
instructions.in.the.owner’s.manual.you.are.certain.that.the.  
Product.is.defective,.pack.the.Product.carefully.(preferably.in.  
its.original.packaging)..Disconnect.the.battery.from.the.Product.  
and.separately.secure.the.battery.in.its.own.separate.packaging.  
within.the.shipping.carton..The.Product.should.include.all.parts.  
and.accessories.originally.packaged.with.the.Product..Include.  
evidence.of.original.purchase.and.a.note.describing.the.defect.  
that.has.caused.you.to.return.it..The.Product.should.be.shipped.  
freight.prepaid,.by.traceable.means,.to.warrantor.at:.  
Uniden.America.Service  
4700.Amon.Carter.Blvd.  
Fort.Worth,.TX.76ꢀ55  
84  
 
 
Installing.the.Phone..................... ꢀ4  
Installing.the.Rechargeable..  
Battery.............................. ꢀ4  
D
Index  
Date.and.Time............................. ꢀ9  
Deleting.a.Redial.Record............ 42  
Deleting.Caller.ID.Numbers......... 39  
Deregistration.............................. 24  
Dial.Mode.................................... ꢀ8  
Digital.Security.Code................... 75  
DirectLink.................................... 48  
Do.Not.Disturb............................. 47  
A
K
Answering.a.Call......................... 35  
Answering.Machine  
Key.Touch.Tone........................... 2ꢀ  
Handset.operation................. 55  
Using.the.handset.&..  
L
base.menu....................... 55  
When.away.from.home.......... 69  
Any.Key.Answer.......................... 32  
Area.Code................................... 52  
AutoTalk....................................... 32  
Language.................................... ꢀ9  
LCD.contrast............................... 2ꢀ  
Liquid.Damage............................ 79  
Low.Battery.Alert......................... 73  
E
Earpiece.Volume......................... 43  
Entering.Text.from.the.Phone...... ꢀ3  
M
B
G
Maintenance................................ 7ꢀ  
Making.a.call............................... 34  
Making.a.call.from.a.Caller.ID.  
Base.Unavailable........................ 75  
Battery.Contacts.Maintenance.... 72  
Battery.Replacement.and..  
Greetings  
Deleting.................................. 58  
Recording.............................. 57  
Selecting................................ 58  
Record.............................. 39  
Handling........................... 72  
Making.a.call.with.Speed.Dial..... 37  
Muting.the.Microphone................ 47  
Muting.the.Ringer........................ 47  
C
H
Caller.ID.on.Call.Waiting............. 20  
Call.screen............................ 60,.65  
Call.Waiting.Deluxe............... 20,.40  
Conferencing............................... 44  
Controls.Parts.of.the.Phone.......... 7  
Handset.Banner.......................... 30  
Hanging.up.................................. 35  
O
Optional.Headset......................... 52  
Out.of.Range............................... 75  
I
Important.Safety.Instructions....... 8ꢀ  
Installing.the.Belt.Clip.................. ꢀ7  
85  
 
 
P
T
Personal identification number .  
(PIN)................................. 60  
T-coil............................................ 43  
Talk.and.Standby.Times.............. 73  
The.FCC.Wants.You.To.Know..... 82  
Personal.Ring.............................. 20  
Phonebook.................................. 25  
Placing.a.Call.on.Hold................. 44  
Privacy.Mode............................... 47  
Product.Overview.......................... 6  
V
Voice.Memo................................. 67  
R
Recording.a.call........................... 66  
Redialing.a.Number..................... 4ꢀ  
Register.Handset......................... 23  
Resetting.the.Handset................. 74  
Ringer.Tones............................... 3ꢀ  
Ringer.Volume............................. 43  
Room/Baby.Monitor..................... 50  
S
Screening.calls...................... 60,.65  
Security.code  
Answering.system.................. 60  
Seven-Digit.Dialing...................... 52  
Speaker.Volume.......................... 43  
Speed.Dial................................... 37  
86  
 
Memo  
87  
 
Remote.Operation.Card  
C U T  
C U T  
Remote access  
away from home  
Turn on the answering  
machine remotely  
Remote access  
away from home  
Turn on the answering  
machine remotely  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering machine announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering machine announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
4. Press 0 then 6 to turn the  
answering machine on.  
4. Press 0 then 6 to turn the  
answering machine on.  
C U T  
C U T  
Remote access  
away from home  
Turn on the answering  
machine remotely  
Remote access  
away from home  
Turn on the answering  
machine remotely  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering machine announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering machine announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
4. Press 0 then 6 to turn the  
answering machine on.  
4. Press 0 then 6 to turn the  
answering machine on.  
88  
 
 
C U T  
C U T  
Task  
Repeat a Message  
Key  
Task  
Repeat a Message  
Key  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Answering Machine On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answering Machine Off  
Help  
Answering Machine On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answering Machine Off  
Help  
C U T  
C U T  
Task  
Repeat a Message  
Key  
Task  
Repeat a Message  
Key  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Answering Machine On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answering Machine Off  
Help  
Answering Machine On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answering Machine Off  
Help  
89  
 
At.Uniden,.we’ll.take.care.of.you!  
Thank. you. for. purchasing. a. Uniden. product.. if. you. have. any. questions. or. problems,.  
please.do.not.return.this.product.to.the.place.of.purchase.  
Our.customer.care.specialists.are.here.to.help.you!.Visit.our.website.at.  
www.  
Having.Trouble?  
or.call.our.Customer.Service.Hotline.at.  
,.  
uniden.com.  
1-800-297-1023  
Monday.through.Friday,.7.AM.to.7.PM.or.Saturday/Sunday,.9.AM.to.5.PM,.  
CST..The.Customer.Service.Hotline.is.closed.on.holidays.  
To.order.headsets,.additional.handsets,.replacement.batteries,.or.other.  
Need.A.Part?  
accessories,.visit.our.website.at.  
.or.call.  
,.  
www.uniden.com  
1-800-554-3988  
Monday.through.Friday,.8.AM.to.5.PM,.CST.  
If.you.need.special.assistance.due.to.a.disability,.or.have.questions.on.the.  
Help.For.Our.  
Customers.with.  
Special.Needs  
accessibility.features.of.this.product,.please.call.  
.(voice.or.  
1-800-874-9314  
TTY).  
May.be.covered.under.one.or.more.of.the.following.U.S..patents:  
4,797,9ꢀ6  
5,38ꢀ,460  
5,58ꢀ,598  
5,696,47ꢀ  
5,787,356  
5,9ꢀ2,968  
6,044,28ꢀ  
6,7ꢀ4,630  
6,90ꢀ,27ꢀ  
5,426,690  
5,650,790  
5,7ꢀ7,3ꢀ2  
5,794,ꢀ52  
5,9ꢀ5,227  
6,070,082  
6,782,098  
6,907,094  
5,434,905  
5,660,269  
5,732,355  
5,80ꢀ,466  
5,929,598  
6,ꢀ25,277  
6,788,920  
6,9ꢀ4,940  
5,49ꢀ,745  
5,66ꢀ,780  
5,754,407  
5,825,ꢀ6ꢀ  
5,930,720  
6,253,088  
6,788,953  
5,533,0ꢀ0  
5,663,98ꢀ  
5,758,289  
5,864,6ꢀ9  
5,960,358  
6,6ꢀ8,0ꢀ5  
6,839,550  
5,574,727  
5,67ꢀ,248  
5,768,345  
5,893,034  
5,987,330  
6,67ꢀ,3ꢀ5  
6,889,ꢀ84  
90  
 
 
 

Telex Marine Radio ur 700 User Manual
Thiel Audio Products Speaker 12 Coherent User Manual
Toastmaster Convection Oven TC1463 User Manual
Toshiba Computer Drive MK2018GAS User Manual
TRENDnet Network Card TEW 641PC User Manual
Tricity Bendix Cooktop SG558 1 User Manual
Tripp Lite Computer Drive UL1778 User Manual
Vision Fitness Elliptical Trainer X6150 User Manual
Vivotek Security Camera PT71373GPP ISMA User Manual
Weber Network Router A127C User Manual